graphengine/third_party/fwkacllib/inc/ops/nn_calculation_ops.h

/**
 * Copyright 2019 Huawei Technologies Co., Ltd
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*!
 * \file nn_calculation_ops.h
 * \brief
 */
#ifndef OPS_BUILT_IN_OP_PROTO_INC_NN_CALCULATION_OPS_H_
#define OPS_BUILT_IN_OP_PROTO_INC_NN_CALCULATION_OPS_H_

#include "graph/operator_reg.h"

namespace ge {
/**
* @brief Computes the gradients of depthwise convolution with respect to
* the filter. \n
* @par Inputs:
* Three inputs include:
* @li input: 4D origin shape of input tensor [N, C, H, W] or [N, H, W, C],
* support float16.
* @li filter_size: A 4D tensor of type int32.
* @li out_backprop: 4D tensor with shape [N, C, H, W] or [N, H, W, C].
* Must be one of the following types: float16. \n

* @par Attributes:
* @li strides: A required list or tuple. The stride of the sliding window
* for height and width of input "x" of the convolution.
* Must be with shape [1, 1, stride_height, stride_width] or
* [1, stride_height, stride_width, 1].
* @li dilations: An optional list or tuple. The dilation factor for each
* dimension of input "x".
* If set to k > 1, there will be k-1 skipped cells between each filter element
* on that dimension. Must be with shape [1, 1, dilation_height, dilation_width]
* or [1, dilation_height, dilation_width, 1].
* @li pads: A required list or tuple. Padding added to each dimension of the
* input.
* @li data_format: An optional string. Input data format, either "NHWC" or
* "NCHW". \n

* @par Outputs:
* filter_grad: Gradient of the deep convolution relative to the filter with
* shape [H, W, C, K]. Must be one of the following types: float32. \n

* @attention Constraints:
* The feature map is 4D with shape [N, C, Hi, Wi] or [N, Hi, Wi, C], but
* the data is 5D with shape [N, C1, Hi, Wi, C0], where C0 is 16.\n
* The filter is 4D with shape [Hf, Wf, C, K], but the data is 6D with shape
* [C1, Hf, Wf, K, Co, C0],
* where K is fixed at 1, and Co and C0 are 16.\n
* Output backprop is 4D with shape [N, C, Ho, Wo] or [N, Ho, Wo, C], but the
* data is 5D with shape [N, C1, Ho, Wo, C0],
* where C is the same as that of the feature map and C0 is 16.\n
* Limited by Tiling and L1 / L0 buffer memory: 512 * ceil(Wo, 16) +
* (480 * stride_h + 32 * filter_h) * ceil(Wi, 16) <= l1_size and Hf*Wf
*  <= l0b_size/512. \n

* @par Third-party framework compatibility
* @li Compatible with the TensorFlow operator DepthwiseConv2DBackpropFilter.
* @li Compatible with the Caffe operator DepthwiseConv2DBackpropFilter.
*/
REG_OP(DepthwiseConv2DBackpropFilter)
    .INPUT(input, TensorType({float16}))
    .INPUT(filter_size, TensorType({DT_INT32, DT_INT64}))
    .INPUT(out_backprop, TensorType({float16}))
    .OUTPUT(filter_grad, TensorType({float32}))
    .REQUIRED_ATTR(strides, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(DepthwiseConv2DBackpropFilter)

/**
* @brief Computes the gradients of depthwise convolution with respect to
* the filter . \n

* @par Inputs:
* Two inputs include: \n
* @li input: 4D tensor with shape [N, C, H, W] or [N, H, W, C], of type float16
* @li out_backprop: 4D tensor with shape [N, C, H, W] or [N, H, W, C],
* of type float16.

* @par Attributes:
* @li filter_size: A required list or tuple. Shape of filter.
* @li strides: A required list or tuple. The stride of the sliding window for
* height and width of input "x" of the convolution.
* Must be with shape [1, 1, stride_height, stride_width] or [1, stride_height,
* stride_width, 1].
* @li dilations: An optional list or tuple. The dilation factor for each
* dimension of input "x".
* If set to k > 1, there will be k-1 skipped cells between each filter element
* on that dimension. Must be with shape [1, 1, dilation_height, dilation_width]
* or [1, dilation_height, dilation_width, 1].
* @li pads: A required list or tuple. Padding added to each dimension of the
* input.
* @li data_format: An optional string. Input data format, either "NHWC" or
* "NCHW" . \n

* @par Outputs:
* filter_grad: Gradient of the deep convolution relative to the filter with
* shape [H, W, C, K]. Must be of type float32 . \n

* @attention Constraints:\n
* The feature map is 4D with shape [N, C, Hi, Wi] or [N, Hi, Wi, C], but
* the data is 5D with shape [N, C1, Hi, Wi, C0], where C0 is 16.\n
* The filter is 4D with shape [Hf, Wf, C, K], but the data is 6D with shape
* [C1, Hf, Wf, K, Co, C0],
* where K is fixed at 1, and Co and C0 are 16.\n
* Output backprop is 4D with shape [N, C, Ho, Wo] or [N, Ho, Wo, C], but the
* data is 5D with shape [N, C1, Ho, Wo, C0],
* where C is the same as that of the feature map and C0 is 16.\n
* Limited by Tiling and L1 / L0 buffer memory: 512 * ceil(Wo, 16) + (480 *
* stride_h + 32 * filter_h) * ceil(Wi, 16) <= l1_size and Hf*Wf <= l0b_size/512 . \n

* @par Third-party framework compatibility
* @li Compatible with the TensorFlow operator DepthwiseConv2DBackpropFilter.
* @li Compatible with the Caffe operator DepthwiseConv2DBackpropFilter.
*
* @par Restrictions:
* Warning: THIS FUNCTION IS DEPRECATED. Please use DepthwiseConv2DBackpropFilter
* instead.
*/
REG_OP(DepthwiseConv2DBackpropFilterD)
    .INPUT(input, TensorType({DT_FLOAT16, DT_FLOAT, DT_BF16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_FLOAT, DT_BF16}))
    .OUTPUT(filter_grad, TensorType({DT_FLOAT32}))
    .REQUIRED_ATTR(filter_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(DepthwiseConv2DBackpropFilterD)

/**
* @brief Computes the gradients of depthwise convolution with respect to the
* input. \n
* @par Inputs:
* Three inputs include:
* @li input_size: 4D shape of input tensor [N, C, H, W] or [N, H, W, C],
* support int32.
* @li filter: 4D filter tensor with shape of [H, W, C, K], support float16.
* @li out_backprop: 4D tensor with shape [N, C, H, W] or [N, H, W, C].
* Must be one of the following types: float16 . \n

* @par Attributes:
* @li strides: A required list or tuple of int32. The stride of the sliding
* window for height and width of input "x" of the convolution.
* Must be with shape [1, 1, stride_height, stride_width] or [1, stride_height,
* stride_width, 1].
* @li dilations: An optional list or tuple of int32. The dilation factor for
* each dimension of input "x". Defaults to "[1, 1, 1, 1]".
* If set to k > 1, there will be k-1 skipped cells between each filter element
* on that dimension. Must be with shape [1, 1, dilation_height, dilation_width]
* or [1, dilation_height, dilation_width, 1].
* @li pads: A required list or tuple of int32. Padding added to each dimension
* of the input.
* @li data_format: An optional string. Input data format, either "NHWC" or
* "NCHW". Defaults to "NHWC" . \n

* @par Outputs:
* input_grad: Gradient of the deep convolution relative to the input with shape
* [N, C, H, W] or [N, H, W, C] Must be one of the following types:
* float16. \n

* @attention Constraints:\n
* The feature map is 4D with shape [N, C, Hi, Wi] or [N, Hi, Wi, C], but
* the data is 5D with shape [N, C1, Hi, Wi, C0], where C0 is 16.\n
* The filter is 4D with shape [Hf, Wf, C, K], but the data is 6D with shape
* [C1, Hf, Wf, K, Co, C0],
* where K is fixed at 1, and Co and C0 are 16.\n
* Output backprop is 4D with shape [N, C, Ho, Wo] or [N, Ho, Wo, C], but the
* data is 5D with shape [N, C1, Ho, Wo, C0],
* where C is the same as that of the feature map and C0 is 16.\n
* Limited by Tiling: max_h_in_l1 >= C0, where max_h_in_l1 = (l1_size - Hf *
* Wf * C0 * C0 * 2) / (2 * Wo *C0). \n

* @par Third-party framework compatibility
* @li Compatible with the TensorFlow operator DepthwiseConv2DBackpropInput.
* @li Compatible with the Caffe operator DepthwiseConv2DBackpropInput.
*/
REG_OP(DepthwiseConv2DBackpropInput)
    .INPUT(input_size, TensorType({DT_INT32, DT_INT64}))
    .INPUT(filter, TensorType({DT_FLOAT16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16}))
    .OUTPUT(input_grad, TensorType({DT_FLOAT16, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(DepthwiseConv2DBackpropInput)

/**
* @brief Computes the gradients of depthwise convolution with respect to the
* input . \n

* @par Inputs:
* Two inputs include: \n
* @li filter: A 4D tensor of type float16, with shape [H, W, C, K]
* @li out_backprop: 4D tensor with shape [N, C, H, W] or [N, H, W, C], of
* type float16

* @par Attributes:
* @li input_size: A required list or tuple. The origin shape of input.
* @li strides: A required list or tuple. The stride of the sliding window for
* height and width of input "x" of the convolution.
* Must be with shape [1, 1, stride_height, stride_width] or [1, stride_height,
* stride_width, 1].
* @li dilations: An optional list or tuple. The dilation factor for each
* dimension of input "x".
* If set to k > 1, there will be k-1 skipped cells between each filter element
* on that dimension. Must be with shape [1, 1, dilation_height, dilation_width]
* or [1, dilation_height, dilation_width, 1].
* @li pads: A required list or tuple. Padding added to each dimension of the
* input.
* @li data_format: An optional string. Input data format, either "NHWC" or
* "NCHW" . \n

* @par Outputs:
* input_grad: Gradient of the deep convolution relative to the input with
* shape [N, C, H, W] or [N, H, W, C]. Must be of type float16 . \n

* @attention Constraints:\n
* The feature map is 4D with shape [N, C, Hi, Wi] or [N, Hi, Wi, C], but
* the data is 5D with shape [N, C1, Hi, Wi, C0], where C0 is 16.\n
* The filter is 4D with shape [Hf, Wf, C, K], but the data is 6D with shape
* [C1, Hf, Wf, K, Co, C0],
* where K is fixed at 1, and Co and C0 are 16.\n
* Output backprop is 4D with shape [N, C, Ho, Wo] or [N, Ho, Wo, C], but the
* data is 5D with shape [N, C1, Ho, Wo, C0],
* where C is the same as that of the feature map and C0 is 16.\n
* Limited by Tiling: max_h_in_l1 >= C0, where max_h_in_l1 = (l1_size - Hf *
* Wf * C0 * C0 * 2) / (2 * Wo *C0).\n

* @par Third-party framework compatibility
* @li Compatible with the TensorFlow operator DepthwiseConv2DBackpropInput.
* @li Compatible with the Caffe operator DepthwiseConv2DBackpropInput.
*
* @par Restrictions:
* Warning: THIS FUNCTION IS DEPRECATED. Please use DepthwiseConv2DBackpropInput
* instead.
*/
REG_OP(DepthwiseConv2DBackpropInputD)
    .INPUT(filter, TensorType({DT_FLOAT16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16}))
    .OUTPUT(input_grad, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .REQUIRED_ATTR(input_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(DepthwiseConv2DBackpropInputD)

/**
*@brief Computes a 2D deep convolution given a 4D input tensor and a filter
* tensor . \n

*@par Inputs:
*Two required inputs and two optional inputs, including: \n
* @li x: A 4D tensor of type float16 or int8 or int4, with shape [N, C, H, W] or [N, H, W, C]
* @li filter: A 4D tensor of type float16 or int8 or int4, with shape [H, W, C, K]
* @li bias: An optional tensor of type float16 or int32
* @li offset_w: An optional float16 or int8 or int4, used for quantized inference

* @par Attributes:
* @li strides: A required list or tuple. The stride of the sliding window for
* height and width of input "x" of the convolution.
* Must be with shape [1, 1, stride_height, stride_width] or [1, stride_height,
* stride_width, 1].
* @li dilations: An optional list or tuple. The dilation factor for each
* dimension of input "x".
* If set to k > 1, there will be k-1 skipped cells between each filter element
* on that dimension. Must be with shape [1, 1, dilation_height, dilation_width]
* or [1, dilation_height, dilation_width, 1]. Defaults to "[1, 1, 1, 1]".
* @li pads: A required list or tuple of int32. Padding added to each dimension of the
* input.
* @li data_format: An optional string. Input data format, either "NHWC" or
* "NCHW". Defaults to "NHWC".
* @li offset_x: An optional int. Input offset, used for quantized inference.
* Defaults to 0 . \n

* @par Outputs:
* y: 4D tensor of type float16 or int32, with shape [N, C, H, W] or [N, H, W, C]

* @attention Constraints:\n
* The feature map is 4D with shape [N, C, Hi, Wi] or [N, Hi, Wi, C], but
* the data is 5D with shape [N, C1, Hi, Wi, C0], where C0 is 16.\n
* The filter is 4D with shape [Hf, Wf, C, K], but the data is 6D with shape
* [C1, Hf, Wf, K, Co, C0],
* where K is fixed at 1, and Co and C0 are 16.\n
* Limited by the size of L1 buffer memory: \n
* (l1_size - filter_h*filter_w*BLOCK_SIZE*BLOCK_SIZE*data_size) // (Wi *
* BLOCK_SIZE * data_size) >= (BLOCK_SIZE * strides_h + filter_h - strides_h).\n

* @par Quantization supported or not
* Yes

* @par Third-party framework compatibility
* @li Compatible with the TensorFlow operator DepthwiseConv2D.
* @li Compatible with the Caffe operator DepthwiseConv2D.
*/
REG_OP(DepthwiseConv2D)
    .INPUT(x, TensorType({DT_FLOAT16, DT_INT8, DT_INT4}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8, DT_INT4}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_FLOAT16, DT_INT8, DT_INT4}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(data_format, String, "NHWC")
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(DepthwiseConv2D)

/**
*@brief Performs the the backward operation for "BiasAdd" on the "bias" tensor.
*        It accumulates all the values from out_backprop into the feature
*        dimension. For NHWC data format, the feature dimension is the last.
*        For NCHW data format, the feature dimension is the third-to-last . \n

*@par Inputs:
* x: A Tensor of type NumberType . \n

*@par Attributes:
* data_format: Data format. Defaults to "NHWC" . \n

*@par Outputs:
* y: A Tensor.Has the same type as "x" . \n

*@par Third-party framework compatibility
* Compatible with the TensorFlow operator BiasAddGrad.
*/
REG_OP(BiasAddGrad)
    .INPUT(x, TensorType::NumberType())
    .OUTPUT(y, TensorType::NumberType())
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(BiasAddGrad)

/**
*@brief Computes the gradients of convolution with respect to the input.
* @par Inputs:
 * Three inputs:
 * @li input_size: A const Tensor of type int32. Currently does not support
 * data tensor. An integer vector representing the shape of input, where
 * input is a 4-D tensor [batch, height, width, channels]
 * or [batch, channels, height, width].
 * @li filter: A Tensor. Must be one of the following types: float16.
 * 4-D with shape [filter_height, filter_width, in_channels, out_channels]
 * or [out_channels, filter_height, filter_width, in_channels]
 * or [out_channels, in_channel, filter_height, filter_width].
 * @li out_backprop: A Tensor. Must have the same type as filter.
 * 4-D with shape [batch, out_height, out_width, out_channels]
 * or [batch, out_channels, out_height, out_width].
 * Gradients with respect to the output of the convolution.
 *\n
 *\n
 * The following are the supported data types and data formats:\n
 *\n
 *\n
    | Tensor    | out_bckprop | filter  | y      |\n
    |-----------|-------------|---------|--------|\n
    | Data Type | float16     | float16 | float16|\n
    | Format    | NCHW        | NCHW    | NCHW   |\n
    |           | NHWC        | HWCN    | NHWC   |\n
 *\n
 *
*@par Attributes:
 * Five attributes:
 * @li strides: A tuple/list of 4 integers. The stride of the sliding window
 * for H/W dimension. The index of H/W is same as data_format.
 * @li pads: A tuple/list of 4 integers, [top, bottom, left, right] pads
 * on feature map
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each
 * dimension of input, defaults to [1,1,1,1].
 * @li groups: Number of blocked connections from input channels to output
 * channels.
 * @li data_format: An optional string from: "NHWC", "NCHW". Defaults to
 * "NHWC". Specify the data format of the input and output data.
 *\n
 *\n
 * The following value range restrictions must be met:\n
 *\n
 *\n
    | Name             | Field    | Scope        |\n
    |------------------|----------|--------------|\n
    | input_size       | H        | [1, 4096]    |\n
    |                  | W        | [1, 4096]    |\n
    | Filter           | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | out_backprop     | H*strideH| [1, 4096]    |\n
    |                  | W*strideW| [1, 4096]    |\n
    | y(fmap)          | H        | [1, 4096]    |\n
    |                  | W        | [1, 4096]    |\n
    | Stride           | H        | [1, 63]      |\n
    |                  | W        | [1, 63]      |\n
    | Padding          | Top      | [0, 255]     |\n
    |                  | Bottom   | [0, 255]     |\n
    |                  | Left     | [0, 255]     |\n
    |                  | Right    | [0, 255]     |\n
    | Dilation         | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
 *\n

 * In Ascend910, fmap or out_backprop's H and W not support 1 when\n
 * fmap_h + pad_top + pad_bottom != (filter_height - 1) * dilation_h + 1
 * and filter_width > fmap_width.
 * If filter_h = 1 and filter_w = 1, out_backprop_w * stride_h *
 *  stride_w < 4096. \n
 *
*@par Outputs:
 * y: A Tensor. Has the same type as filter,and has same format as input_size.
 *\n
 *     out_backprop_height = (fmap_height + pad_top + pad_bottom -
 *                           (dilation_h * (filter_height - 1) + 1))
 *                           / stride_h + 1
 *\n
 *     out_backprop_width = (fmap_width + pad_left + pad_right -
 *                          (dilation_w * (filter_width - 1) + 1))
 *                          / stride_w + 1
 *\n
 *
*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv2d_backprop_input
*/
REG_OP(Conv2DBackpropInput)
    .INPUT(input_size, TensorType({DT_INT32}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(Conv2DBackpropInput)

/**
*@brief Computes the gradients of convolution with respect to the input.
* @par Inputs:
 * Two inputs:
 * @li filter: A Tensor. Types is float16 or int8.
 * 4-D with shape [filter_height, filter_width, in_channels, out_channels]
 * or [out_channels, filter_height, filter_width, in_channels]
 * or [out_channels, in_channel, filter_height, filter_width].
 * @li out_backprop: A Tensor. Must have the same type as filter.
 * 4-D with shape [batch, out_height, out_width, out_channels]
 * or [batch, out_channels, out_height, out_width].
 * Gradients with respect to the output of the convolution.
*@par Attributes:
 * Six attributes:
 * @li input_size A Tensor of type int32. An integer vector representing the
 * shape of input, where input is a 4-D tensor [batch, height, width, channels]
 * or [batch, channels, height, width].
 * @li strides: A tuple/list of 4 integers. The stride of the sliding window
 * for H/W dimension. The index of H/W is same as data_format.
 * @li pads: A tuple/list of 4 integers, [top, bottom, left, right] pads on
 * feature map
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each
 * dimension of input, defaults to [1,1,1,1].
 * @li groups: Number of blocked connections from input channels to output
 * channels.
 * @li data_format: An optional string from: "NHWC", "NCHW". Defaults to
 * "NHWC". Specify the data format of the input and output data.
*@par Outputs:
 * y: A Tensor. with the type of: float16, float32, int32, 4-D tensor
 * [batch, height, width, channels] or [batch, channels, height, width].
* @par Third-party framework compatibility
 * Compatible with Tensorflow's conv2d_backprop_input
*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv2DBackpropInput instead.
*/
REG_OP(Conv2DBackpropInputD)
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8, DT_BF16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_INT8, DT_BF16}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT32, DT_BF16}))
    .REQUIRED_ATTR(input_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(Conv2DBackpropInputD)

/**
*@brief Computes the Deconvolution with respect to the input.
* @par Inputs:
 * Two required inputs:
 * @li x: A Tensor of type float16 or int8. 4D with shape
 * [batch, out_channels, out_height, out_width]. Gradients with respect
 * to the output of the convolution.
 * @li filter: A Tensor. Must have the same type as "x".
 * 4D with shape [out_channels, in_channel, filter_height, filter_width].\n
 * Two optional inputs:
 * @li bias: An optional tensor. Must have the same type as "y".
 * @li offset_w: An optional 1D tensor for quantized deconvolution.
 * Type is int8. Reserved.
 *\n
 *\n
 * The following are the supported data types and data formats:\n
 *\n
 *\n
    | Tensor    | x       | filter  | bias    | y      |\n
    |-----------|---------|---------|---------|--------|\n
    | Data Type | float16 | float16 | float16 | float16|\n
    |           | int8    | int8    | int32   | int32  |\n
    | Format    | NCHW    | NCHW    | ND      | NCHW   |\n
 *\n
 * For int8, a dequant or requant operator must be followed.
 *\n
 *
*@par Attributes:
 * Six attributes:
 * @li strides: A tuple or list of 2 integers. The stride of the sliding window
 * for H/W dimension, defaults to [1,1].
 * @li pads: A tuple or list of 4 integers. The [top, bottom, left, right]
 * padding on the feature map, defaults to [0,0,0,0].
 * @li dilations: A tuple or list of 4 integers. The dilation factor for each
 * dimension of input, defaults to [1,1,1,1].
 * @li groups: Number of blocked connections from input channels to
 * output channels. Defaults to "1".
 * @li data_format: An optional string from: "NCHW". Defaults to "NCHW". \n
 * Specify the data format of the input and output data.
 * @li offset_x: An optional integer for quantized deconvolution.
 * The negative offset added to the input image for int8 type. Ensure offset_x
 * within the effective range of int8 [-128, 127]. Defaults to "0".
 *\n
 *\n
 * The following value range restrictions must be met:\n
 *\n
 *\n
    | Name             | Field    | Scope        |\n
    |------------------|----------|--------------|\n
    | x (out_backprop) | H*strideH| [1, 4096]    |\n
    |                  | W*strideW| [1, 4096]    |\n
    | Filter           | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | y (fmap)         | H        | [1, 4096]    |\n
    |                  | W        | [1, 4096]    |\n
    | Stride           | H        | [1, 63]      |\n
    |                  | W        | [1, 63]      |\n
    | Padding          | Top      | [0, 255]     |\n
    |                  | Bottom   | [0, 255]     |\n
    |                  | Left     | [0, 255]     |\n
    |                  | Right    | [0, 255]     |\n
    | Dilation         | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | Offset_x         |          | [-128, 127]  |\n
 *\n
 * In Ascend910, fmap or out_backprop's H and W not support 1 when\n
 * fmap_h + pad_top + pad_bottom != (filter_height - 1) * dilation_h + 1
 * and filter_width > fmap_width
 * If filter_h = 1 and filter_w = 1,
 *  out_backprop_w * stride_h * stride_w < 4096
 *\n
 *
*@par Outputs:
 * y: A Tensor. 4D tensor with shape [batch, channels, height, width].
 *\n
 *     out_backprop_height = (fmap_height + pad_top + pad_bottom -
 *                           (dilation_h * (filter_height - 1) + 1))
 *                           / stride_h + 1
 *\n
 *     out_backprop_width = (fmap_width + pad_left + pad_right -
 *                          (dilation_w * (filter_width - 1) + 1))
 *                          / stride_w + 1
 *\n
 *
 * When type of x is float16, the type of y must be float16.
 * When type of x is int8, the type of y must be int32.
*/
REG_OP(Deconvolution)
    .INPUT(x, TensorType({DT_FLOAT16, DT_INT8}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_INT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_INT32}))
    .ATTR(strides, ListInt, {1, 1})
    .ATTR(pads, ListInt, {0, 0, 0, 0})
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NCHW")
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Deconvolution)
/**
*@brief Computes the gradients of convolution with respect to the filter
*@par Inputs:
 * Three inputs:
 * @li x: A Tensor. Must be one of the following types: float16.
 * 4-D with shape [batch, in_height, in_width, in_channels] or
 * [batch, in_channels, in_height, in_width].
 * @li filter_size: A const Tensor of type int32. Currently does not support
 * data tensor. An integer vector representing the tensor shape of filter,
 * where filter is a 4-D tensor [filter_height, filter_width, in_channels,
 * out_channels] or [out_channels, filter_height, filter_width, in_channels]
 * or [out_channels, in_channel, filter_height, filter_width].
 * @li out_backprop: A Tensor. Must have the same type as x. 4-D with shape
 * [batch, out_height, out_width, out_channels] or [batch, out_channels,
 * out_height, out_width]. Gradients with respect to the output of the
 * convolution.
 *\n
 *\n
 * The following are the supported data types and data formats:\n
 *\n
 *\n
    | Tensor    | x       | out_backprop | y       |\n
    |-----------|---------|--------------|---------|\n
    | Data Type | float16 |    float16   | float32 |\n
    | Format    | NCHW    |     NCHW     | NCHW    |\n
    |           | NHWC    |     NHWC     | HWCN    |\n
 *\n
 * For float32 and float64 type of x and outbackprop, the actual calculation
 *  on the chip is based on float16.
 *\n
 *
*@par Attributes:
 * Five attributes:
 * @li strides: A tuple/list of 4 integers. The stride of the sliding window
 * for H/W dimension. The index of H/W is same as data_format.
 * @li pads: A tuple/list of 4 integers, [top, bottom, left, right] pads on
 * feature map.
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each
 * dimension of input, defaults to [1,1,1,1].
 * @li groups: Number of blocked connections from input channels to output
 * channels.
 * @li data_format: An optional string from: "NHWC", "NCHW". Defaults to
 * "NHWC". Specify the data format of the input and output data.
 *\n
 *\n
 * The following value range restrictions must be met:\n
 *\n
 *\n
    | Name             | Field    | Scope        |\n
    |------------------|----------|--------------|\n
    | x(fmap)          | H        | [1, 4096]  |\n
    |                  | W        | [1, 4096]    |\n
    | Filter Size      | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | out_backprop     | H        | [1, 4096]  |\n
    |                  | W        | [1, 4096]    |\n
    | y                | H        | [1, 4096]  |\n
    |                  | W        | [1, 4096]    |\n
    | Stride           | H        | [1, 63]      |\n
    |                  | W        | [1, 63]      |\n
    | Padding          | Top      | [0, 255]     |\n
    |                  | Bottom   | [0, 255]     |\n
    |                  | Left     | [0, 255]     |\n
    |                  | Right    | [0, 255]     |\n
    | Dilation         | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
 *\n
*@par Outputs:
 * y: A Tensor. Has the same type as x, has the same format as filter_size.
 *\n
 *     out_backprop_height = (in_height + pad_top + pad_bottom -
 *                           (dilation_h * (filter_height - 1) + 1))
 *                           / stride_h + 1
 *\n
 *     out_backprop_width = (in_width + pad_left + pad_right -
 *                          (dilation_w * (filter_width - 1) + 1))
 *                          / stride_w + 1
 *\n
 *
*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv2d_backprop_filter
*/
REG_OP(Conv2DBackpropFilter)
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .INPUT(filter_size, TensorType({DT_INT32}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(Conv2DBackpropFilter)

/**
*@brief Computes the gradients of convolution with respect to the filter.
*@par Inputs:
 * Two inputs:
 * @li x: A Tensor. Type is float16.
 * 4-D with shape [batch, in_height, in_width, in_channels] or [batch,
 * in_channels, in_height, in_width].
 * @li out_backprop: A Tensor. Must have the same type as x. 4-D with shape
 * [batch, out_height, out_width, out_channels] or [batch, out_channels,
 * out_height, out_width]. Gradients with respect to the output of the
 * convolution.
*@par Attributes:
 * Six attributes:
 * @li filter_size: A Tensor of type integers. An integer vector representing
 * the tensor shape of filter,
 * where filter is a 4-D tensor [filter_height, filter_width, in_channels,
 * out_channels] or [out_channels, filter_height, filter_width, in_channels]
 * or [out_channels, in_channel, filter_height, filter_width].
 * @li strides: A tuple/list of 4 integers. The stride of the sliding window
 * for H/W dimension. The index of H/W is same as data_format.
 * @li pads: A tuple/list of 4 integers, [top, bottom, left, right] pads on
 * feature map
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each
 * dimension of input, defaults to [1,1,1,1].
 * @li groups: Number of blocked connections from input channels to output
 * channels.
 * @li data_format: An optional string from: "NHWC", "NCHW". Defaults to
 * "NHWC". Specify the data format of the input and output data.
*@par Outputs:
 * y: A Tensor. Type is float32, a 4-D tensor [filter_height, filter_width,
 * in_channels, out_channels] or [out_channels, filter_height, filter_width,
 * in_channels] or [out_channels, in_channel, filter_height, filter_width].
 * Compatible with Tensorflow's conv2d_backprop_filter
*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv2DBackpropFilter instead.
*/
REG_OP(Conv2DBackpropFilterD)
    .INPUT(x, TensorType({DT_FLOAT16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16}))
    .OUTPUT(y, TensorType({DT_FLOAT}))
    .REQUIRED_ATTR(filter_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .OP_END_FACTORY_REG(Conv2DBackpropFilterD)

/**
* @brief Computes a 2D convolution given 4D "x" and "filter" tensors.
* @par Inputs:
* @li x: A 4D tensor of input image. With the format "NHWC", the data is stored
* in the order of: [batch, in_height, in_width, in_channels].
* @li filter: A 4D tensor of learnable filters. Must have the same type as "x".
* With the format "HWCN" , the data is stored in the order of: [filter_height,
* filter_width, in_channels / groups, out_channels].
* @li bias: An optional 1D tensor of additive biases to the filter outputs.
* The data is stored in the order of: [out_channels].
* @li offset_w: Reserved.
*\n
*\n
* The following are the supported data types and data formats:
*\n
*\n
| Tensor    | x       | filter  | bias    | y       |\n
| :-------: | :-----: | :-----: | :-----: | :-----: |\n
| Data Type | float16 | float16 | float16 | float16 |\n
|           | float32 | float32 | float32 | float32 |\n
|           | int8    | int8    | int32   | int32   |\n
| Format    | NCHW    | NCHW    | ND      | NCHW    |\n
|           | NHWC    | HWCN    | ND      | NHWC    |\n
*\n
* For float32 type, the actual calculation on the chip is based on
* float16.
*\n
*
* @par Attributes:
* @li strides: Required. A list of 4 integers. The stride of the sliding window
* for each dimension of input. The dimension order is determined by the data
* format of "x". The N and C dimensions must be set to 1.
* @li pads: Required. A list of 4 integers. The number of pixels to add to each
* (top, bottom, left, right) side of the input.
* @li dilations: Optional. A list of 4 integers. The dilation factor for each
* dimension of input. The dimension order is determined by the data format of
* "x". The N and C dimensions must be set to 1. Defaults to [1, 1, 1, 1].
* @li groups: Optional. An integer of type int32. The number of blocked
* connections from input channels to output channels. In_channels and
* out_channels must both be divisible by "groups". Defaults to 1.
* @li offset_x: Optional. An integer of type int32. The negative offset added
* to the input image for int8 type. Ensure that the output is within the
* effective range. Defaults to 0.
* @li data_format: Reserved.
*\n
*\n
* The following value range restrictions must be met:
*\n
*\n
| Name             | Field    | Scope       |\n
| :--------------: | :------: | :---------: |\n
| Input Image Size | H        | [1, 100000] |\n
|                  | W        | [1, 4096]   |\n
| Filter Size      | H        | [1, 255]    |\n
|                  | W        | [1, 255]    |\n
| Stride           | H        | [1, 63]     |\n
|                  | W        | [1, 63]     |\n
| Padding          | Top      | [0, 255]    |\n
|                  | Bottom   | [0, 255]    |\n
|                  | Left     | [0, 255]    |\n
|                  | Right    | [0, 255]    |\n
| Dilation         | H        | [1, 255]    |\n
|                  | W        | [1, 255]    |\n
| Offset_x         | -        | [-128, 127] |\n
*\n
* The W dimension of the input image supports cases exceeding 4096, but it may
* cause compilation errors.
*\n
*
*@par Outputs:
* y: A 4D Tensor of output feature map. Has the same type as "x". With the
* format "NHWC", the data is stored in the order of: [batch, out_height,
* out_width, out_channels].
*\n
*     out_height = (in_height + pad_top + pad_bottom -
*                   (dilation_h * (filter_height - 1) + 1))
*                  / stride_h + 1
*\n
*     out_width = (in_width + pad_left + pad_right -
*                  (dilation_w * (filter_width - 1) + 1))
*                 / stride_w + 1
*\n
*
* @par Quantization supported or not
* Yes
*
* @par Third-party framework compatibility
*@li Compatible with the TensorFlow operator "conv2d".
*@li Compatible with the Caffe operator 2D "Convolution".
*/
REG_OP(Conv2D)
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT, DT_INT8, DT_BF16}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_FLOAT, DT_INT8, DT_BF16}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_FLOAT, DT_INT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT, DT_INT32, DT_BF16}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv2D)

/**
* @brief Computes a 2D convolution given 4D "x" and "filter_compress" tensors.
* @par Inputs:
* @li x: A 4D tensor of input images.
* @li filter_compress: A 4D tensor of compressed filter data blocks.
* @li compress_index: A 1D tensor of index for decompression.
* @li bias: An optional 1D tensor of additive biases to the filter outputs.
* The data is stored in the order of: [out_channels].
* @li offset_w: Reserved.
*\n
*\n
* The following are the supported data types and data formats:
*\n
*\n
| Tensor    | x       | filter_compress  | compress_index | bias    | y       |\n
| :-------: | :-----: | :--------------: | :------------: | :-----: | :-----: |\n
| Data Type |  int8   |       int8       |     int8       |  int32  |  int32  |\n
| Format    |  NCHW   |       NCHW       |      ND        |  ND     |  NCHW   |\n
|           |  NHWC   |       HWCN       |                |         |  NHWC   |\n
*\n
* For float32 type, the actual calculation on the chip is based on
* float16.
*\n
*
* @par Attributes:
* @li strides: Required. A list of 4 integers. The stride of the sliding window
* for each dimension of input. The dimension order is determined by the data
* format of "x". The N and C dimensions must be set to 1.
*@li pads: Required. A list of 4 integers. The number of pixels to add to each
* (top, bottom, left, right) side of the input.
*@li dilations: Optional. A list of 4 integers. The dilation factor for each
* dimension of input. The dimension order is determined by the data format of
* "x". The N and C dimensions must be set to 1. Defaults to [1, 1, 1, 1].
*@li groups: Optional. An integer of type int32. The number of blocked
* connections from input channels to output channels. In_channels and
* out_channels must both be divisible by "groups". Only support 1.
*@li offset_x: Optional. An integer of type int32. The negative offset added
* to the input image for int8 type. Ensure that the output is within the
* effective range. Defaults to 0.
*@li data_format: Reserved.
* @li alg: compress algorithm, default weight_unzip.
*
*@par Outputs:
* y: A 4D Tensor of output feature map. Has the same type as "x". With the
* format "NHWC", the data is stored in the order of: [batch, out_height,
* out_width, out_channels].
*\n
*
*@par Restrictions:
*Warning: THIS FUNCTION IS EXPERIMENTAL.
*/
REG_OP(Conv2DCompress)
    .INPUT(x, TensorType({DT_INT8}))
    .INPUT(filter_compress, TensorType({DT_INT8}))
    .INPUT(compress_index, TensorType({DT_INT8}))
    .OPTIONAL_INPUT(bias, TensorType({DT_INT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_INT32}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .ATTR(offset_x, Int, 0)
    .ATTR(alg, String, "weight_unzip")
    .OP_END_FACTORY_REG(Conv2DCompress)

/**
*@brief Computes a 2D deformable convolution given 4D "x", "filter" and
* "offsets" tensors.
*@par Inputs:
*@li x: A 4D tensor of input image. With the format "NHWC", the data is stored
* in the order of: [batch, in_height, in_width, in_channels].
*@li filter: A 4D tensor of learnable filters. Must have the same type as "x".
* With the format "HWCN" , the data is stored in the order of: [filter_height,
* filter_width, in_channels / groups, out_channels].
*@li offsets: A 4D tensor of x-y coordinates offset and mask. With the format
* "NHWC", the data is stored in the order of: [batch, out_height, out_width,
* deformable_groups * filter_height * filter_width * 3].
*@li bias: An optional 1D tensor of additive biases to the filter outputs.
* The data is stored in the order of: [out_channels].
*\n
*\n
* The following are the supported data types and data formats:
*\n
*\n
| Tensor    | x       | filter  | offsets | bias    | y       |\n
| :-------: | :-----: | :-----: | :-----: | :-----: | :-----: |\n
| Data Type | float16 | float16 | float16 | float16 | float16 |\n
|           | float32 | float32 | float32 | float32 | float32 |\n
| Format    | NCHW    | NCHW    | NCHW    | ND      | NCHW    |\n
|           | NHWC    | HWCN    | NCHW    |         | NHWC    |\n
*\n
* For float32 type, the actual convolution calculation part on the chip is
* based on float16.
*\n
*
*@par Attributes:
*@li strides: Required. A list of 4 integers. The stride of the sliding window
* for each dimension of input. The dimension order is interpreted according to
* the data format of "x". The N and C dimensions must be set to 1.
*@li pads: Required. A list of 4 integers. The number of pixels to add to each
* (top, bottom, left, right) side of the input.
*@li dilations: Optional. A list of 4 integers. The dilation factor for each
* dimension of input. The dimension order is interpreted according to the data
* format of "x". The N and C dimensions must be set to 1. Defaults to
* [1, 1, 1, 1].
*@li groups: Optional. An integer of type int32. The number of blocked
* connections from input channels to output channels. In_channels and
* out_channels must both be divisible by "groups". Defaults to 1.
*@li data_format: Reserved.
*@li deformable_groups: Optional. An integer of type int32. The number of
* deformable group partitions. In_channels must be divisible by
* "deformable_groups". Defaults to 1.
*@li modulated: Optional. Specify version of DeformableConv2D, true means v2,
* false means v1, currently only support v2.
*\n
*\n
* The following value range restrictions must be met:
*\n
*\n
| Name             | Field    | Scope                       |\n
| :--------------: | :------: | :-------------------------: |\n
| Input Image Size | H        | [1, 100000 / filter_height] |\n
|                  | W        | [1, 4096 / filter_width]    |\n
| Filter Size      | H        | [1, 63]                     |\n
|                  | W        | [1, 63]                     |\n
*\n
*
*@par Outputs:
* y:  A 4D Tensor of output feature map. Has the same type as "x". With the
* format "NHWC", the data is stored in the order of: [batch, out_height,
* out_width, out_channels].
*\n
*     out_height = (in_height + pad_top + pad_bottom -
*                   (dilation_h * (filter_height - 1) + 1))
*                  / stride_h + 1
*\n
*     out_width = (in_width + pad_left + pad_right -
*                  (dilation_w * (filter_width - 1) + 1))
*                 / stride_w + 1
*\n
*
*@par Quantization supported or not
*@li No
*
*@par Third-party framework compatibility
*@li Compatible with the Mxnet operator "DeformableConvolution".
*@li Compatible with the Paddlepaddle operator "deformable_conv".
*@li Compatible with the Mmcv operator "deform_conv".
*/
REG_OP(DeformableConv2D)
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_FLOAT}))
    .INPUT(offsets, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .ATTR(deformable_groups, Int, 1)
    .ATTR(modulated, Bool, true)
    .OP_END_FACTORY_REG(DeformableConv2D)

/**
*@brief Computes a 3D convolution given 5D "x" and "filter" tensors.
*@par Inputs:
 * @li x: A 5D tensor. Must be one of the following types: float16, int8.
 * The format of x is NCDHW or NDHWC.
 * @li filter: A 5D tensor of the same type as "x".
 * The format is NCDHW, NDHWC or DHWCN.
 * @li bias: Optional. An 1D tensor of the same type as "x".
 * @li offset_w: Optional. An 1D tensor for quantized deconvolution. \n

*@par Attributes:
 * @li strides: Required. A list of 5 integers. Specifies the stride of the
 *  sliding window for each dimension of "x".
 * The N and C dimensions must be 1. Has the same format as "x".
 * @li pads: Required. A list of 6 integers.
 * Supports only padding along the D, H and W dimensions in sequence of head,
 * tail, top, bottom, left and right.
 * @li dilations: Optional. A list of 5 integers. Specifies the dilation
 *  factor for each dimension of "x".
 * @li groups: Optional. Number of blocked connections from input channels
 *  to output channels.
 * @li data_format: Optional. An string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data.
 * The N, C and D dimensions must be 1. Has the same format as "x".
 * @li offset_x: Optional. An int. Input offset, used for quantized inference.
 * Defaults to 0. Reserved. \n

*@par Outputs:
 * y: A Tensor. Has the same data format as "x". if the type of "x" is int8,
 * the type of y is int32. \n

*@attention Constraints:
 * The image size after padding is greater than the filter size. \n

*@par Third-party framework compatibility
 * @li Compatible with the TensorFlow operator conv3d.
 * @li Compatible with the Caffe operator Convolution.
*/
REG_OP(Conv3D)
    .INPUT(x, TensorType({DT_FLOAT16, DT_INT8}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_FLOAT32, DT_INT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT32, DT_INT32}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv3D)


/**
*@brief Computes the gradients of convolution 3d with respect to the input.
*@par Inputs:
 * @li input_size: A Tensor of type int32. An integer vector
 *  representing the shape of input, where input is a 5-D tensor
 * [batch, depth, height, width, channels] or
 * [batch, channels, depth, height, width].
 * @li filter: A Tensor. Must be one of the following types: float16.
 * @li out_backprop: A Tensor. Must have the same type as filter.
 * 5-D with shape [batch, depth, out_height, out_width, out_channels]
 * or [batch, out_channels, depth, out_height, out_width]. Gradients with
 * respect to the output of the convolution. \n

*@par Attributes:
 * @li strides: Required. A list of 5 integers. Specifies the stride of the
 *  sliding window for each dimension of "out_backprop".
 * The N and C dimensions must be 1. Has the same format as "out_backprop".
 * @li pads: Required. A list of 6 integers.
 * Supports only padding along the D, H and W dimensions in sequence of head,
 * tail, top, bottom, left and right.
 * @li dilations: Optional. A tuple/list of 5 integers, The dilation factor
 *  for each dimension of the input.
 * The N, C and D dimensions must be 1. Has the same format as "out_backprop".
 * @li groups: Optional. Number of blocked connections from input channels
 *  to output channels.
 * @li data_format: Optional. An string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data. \n

*@par Outputs:
 * y: A Tensor. Has same format as "input_size". \n

*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv3d_backprop_input
*/
REG_OP(Conv3DBackpropInput)
    .INPUT(input_size, TensorType({DT_INT32, DT_INT64}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .OP_END_FACTORY_REG(Conv3DBackpropInput)

/**
*@brief Computes the gradients of convolution 3d with respect to the input.

*@par Inputs:
 * @li filter: A Tensor whose type is float16. The format of filter is NCDHW,
 * NDHWC or DHWCN.
 * @li out_backprop: A Tensor. Must have the same type as filter. The format is
 * NDHWC or NCDHW. \n

*@par Attributes:
 * @li input_size: Required. A tuple/list of type int32, int64. An integer vector
 * representing the shape of input, where input is a 5-D tensor
 * [batch, depth, height, width, channels] or
 * [batch, channels, depth, height, width].
 * @li strides: Required. A list of 5 integers. Specifies the stride of the sliding window
 * for each dimension of "out_backprop".
 * The N and C dimensions must be 1. Has the same format as "out_backprop".
 * @li pads: Required. A list of 6 integers. Supports only padding along the D, H and W
 * dimensions in sequence of head, tail, top, bottom, left and right.
 * @li dilations: Optional. A tuple/list of 5 integers, The dilation factor for each
 * dimension of input.
 * The N, C and D dimensions must be 1. Has the same format as "out_backprop".
 * @li groups: Optional. Number of blocked connections from input channels to output
 * channels.
 * @li data_format: Optional. An string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data. \n

*@par Outputs:
 * y: A Tensor. Has the same type and data format as "out_backprop". \n

*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv3d_backprop_input. \n

*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv3DBackpropInput instead.
*/
REG_OP(Conv3DBackpropInputD)
    .INPUT(filter, TensorType({DT_FLOAT16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .REQUIRED_ATTR(input_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .OP_END_FACTORY_REG(Conv3DBackpropInputD)

/**
*@brief Applies a multi-layer long short-term memory (LSTM) RNN to an input sequence . \n

*@par Inputs:
* @li x: A Tensor dtype of float16.
* @li cont: A Tensor dtype of float16, float32.
* @li w_x: A Tensor dtype of float16.
* @li bias: A Tensor dtype of int16, int32, float16, float32.
* @li w_h: A Tensor dtype of float16.
* @li x_static: A optinal Tensor dtype of float16.
* @li h_0: A optinal Tensor dtype of float16, float32.
* @li c_0: A optinal Tensor dtype of float16, float32.
* @li w_x_static: A optinal Tensor dtype of float16 . \n

*@par Attributes:
*@li num_output: A Scalar of output size dtype of int.
*@li expose_hidden: A Scalar(bool) of features hidden . \n

*@par Outputs:
*@li h: A Tensor dtype of float16, float32.
* @li h_t: A optinal Tensor dtype of float16, float32. The hidden state at time t.
* @li c_t: A optinal Tensor dtype of float16, float32. The cell state at time t . \n

*@par Third-party framework compatibility:
* Compatible with the Caffe operator LSTM.
*/
REG_OP(LSTM)
    .INPUT(x, TensorType({DT_FLOAT16}))
    .INPUT(cont, TensorType({DT_FLOAT32,DT_FLOAT16}))
    .INPUT(w_x, TensorType({DT_FLOAT16}))
    .INPUT(bias, TensorType({DT_FLOAT16,DT_FLOAT32,DT_INT16,DT_INT32}))
    .INPUT(w_h, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(x_static, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(h_0, TensorType({DT_FLOAT16,DT_FLOAT32}))
    .OPTIONAL_INPUT(c_0, TensorType({DT_FLOAT16,DT_FLOAT32}))
    .OPTIONAL_INPUT(w_x_static, TensorType({DT_FLOAT16}))
    .OUTPUT(h, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(h_t, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(c_t, TensorType({DT_FLOAT16, DT_FLOAT}))
    .ATTR(num_output, Int, 0)
    .ATTR(expose_hidden, Bool, false)
    .OP_END_FACTORY_REG(LSTM)

/**
*@brief Computes the gradients of convolution3D with respect to the filter
*@par Inputs:
 * @li x: A Tensor. Must be one of the following types: float16.
 * 5-D with shape [batch, in_depth, in_height, in_width, in_channels]
 * or [batch, in_channels, in_depth, in_height, in_width].
 * @li filter_size: A Tensor of type int32. An integer vector representing the
 * tensor shape of filter, where filter is a 5-D tensor
 * [filter_depth, filter_height, filter_width, in_channels, out_channels]
 * [out_channels, in_channels, filter_depth, filter_height, filter_width]
 * or [out_channels, filter_depth, filter_height, filter_width, in_channels].
 * @li out_backprop: A Tensor. Must have the same type as x.
 * 5-D with shape [batch, out_depth, out_height, out_width, out_channels]
 * or [batch, out_channels, out_depth, out_height, out_width].
 * Gradients with respect to the output of the convolution. \n

*@par Attributes:
 * @li strides: Required. A tuple/list of 5 integers. Specifies the stride
 * of the sliding window for each dimension of "x". The N and C dimensions
 * must be 1. Has the same format as "x".
 * @li pads: Required. A tuple/list of 6 integers, [front, back, top, bottom,
 * left, right] pads on feature map.
 * @li dilations: Optional. A tuple/list of 5 integers, The dilation factor
 * for each dimension of input.
 * The N, C and D dimensions must be 1. Has the same format as "x".
 * @li groups: Optional. Number of blocked connections from input channels
 * to output channels.
 * @li data_format: Optional. An string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data. \n

*@par Outputs:
 * y: A Tensor that has the type float32 and the format is NDHWC, NCDHW
 * or DHWCN. \n

*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv3d_backprop_filter
*/
REG_OP(Conv3DBackpropFilter)
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .INPUT(filter_size, TensorType({DT_INT32}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .OP_END_FACTORY_REG(Conv3DBackpropFilter)

/**
*@brief Computes the gradients of convolution with respect to the filter.

*@par Inputs:
 * @li x: A Tensor of type float16.
 * 5-D with shape [batch, in_depth, in_height, in_width, in_channels]
 * or [batch, in_channels, in_depth, in_height, in_width].
 * @li out_backprop: A Tensor. Must have the same type as x.
 * 5-D with shape [batch, out_depth, out_height, out_width, out_channels]
 * or [batch, out_channels, out_depth, out_height, out_width].
 * Gradients with respect to the output of the convolution. \n

*@par Attributes:
 * @li filter_size: Required. A tuple/list of type integers. An integer vector
 * representing the tensor shape of filter, where filter is a 5-D tensor
 * [filter_depth, filter_height, filter_width, in_channels, out_channels],
 * [out_channels, filter_depth, filter_height, filter_width, in_channels]
 * or [out_channels, in_channels, filter_depth, filter_height, filter_width].
 * @li strides: Required. A tuple/list of 5 integers. Specifies the stride of the sliding
 * window for each dimension of "x".
 * The N and C dimensions must be 1. Has the same format as "x".
 * @li pads: Required. A tuple/list of 6 integers, [front, back, top, bottom, left, right]
 * pads on feature map.
 * @li dilations: Optional. A tuple/list of 5 integers, The dilation factor for each
 * dimension of input.
 * The N, C and D dimensions must be 1. Has the same format as "x".
 * @li groups: Optional. Number of blocked connections from input channels to output
 * channels.
 * @li data_format: Optional. An optional string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data. \n

*@par Outputs:
 * y: A Tensor of type float32 and the format is NDHWC, NCDHW or DHWCN. \n

*@par Third-party framework compatibility
 * Compatible with Tensorflow's conv3d_backprop_filter. \n

*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv3DBackpropFilter instead.
*/
REG_OP(Conv3DBackpropFilterD)
    .INPUT(x, TensorType({DT_FLOAT16}))
    .INPUT(out_backprop, TensorType({DT_FLOAT16}))
    .OUTPUT(y, TensorType({DT_FLOAT}))
    .REQUIRED_ATTR(filter_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .OP_END_FACTORY_REG(Conv3DBackpropFilterD)

/**
*@brief Computes the transpose of convolution 3d with respect to the input.

*@par Inputs:
 * @li input_size: A Tensor of type int32. An integer vector
 * representing the shape of input.
 * @li x: A Tensor of type float16, currently does not support int8. The format
 * is NDHWC or NCDHW.
 * @li filter: A Tensor of type float16, currently does not support int8.
 * The format is NDHWC, NCDHW or DHWCN.
 * @li bias: Optional. An optional 1D tensor of the same type as "x". Reserved.
 * @li offset_w: Optional. An optional 1D tensor for quantized deconvolution.
 *  Reserved. \n

*@par Attributes:
 * @li strides: Required. A tuple/list of 5 integers. Specifies the stride of
 * the sliding window for each dimension of "x".
 * The N and C dimensions must be 1. Has the same format as "x".
 * @li pads: Required. A tuple/list of 6 integers.
 * @li dilations: Optional. A tuple/list of 5 integers,
 * The dilation factor for each dimension of input.
 * The N, C and D dimensions must be 1. Has the same format as "x".
 * @li groups: Optional. Number of blocked connections from input channels to
 *  output channels.
 * @li data_format: Optional. An string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data.
 * @li output_padding: Optional. The size will be added in the output shape.
 * @li offset_x: Optional. Input offset_x value. Reserved. \n

*@par Outputs:
 * y: A Tensor. Has the same format as "x", has the type float16, float32.
*/
REG_OP(Conv3DTranspose)
    .INPUT(input_size, TensorType({DT_INT32, DT_INT64}))
    .INPUT(x, TensorType({DT_FLOAT16}))
    .INPUT(filter, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .ATTR(output_padding, ListInt, {0, 0, 0, 0, 0})
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv3DTranspose)

/**
*@brief Computes the transpose of convolution 3d with respect to the input.

*@par Inputs:
 * @li x: A Tensor of type float16, currently does not support int8.
 * The format is NDHWC or NCDHW.
 * @li filter: A Tensor of type float16, currently does not support int8.
 * The format is NDHWC, NCDHW or DHWCN.
 * @li bias: Optional. An 1D tensor of the same type as "x".
 * @li offset_w: Optional. An 1D tensor for quantized deconvolution. Reserved. \n

*@par Attributes:
 * @li input_size: Required. A tuple/list of type int32.
 * An integer vector representing the shape of input.
 * @li strides: Required. A tuple/list of 5 integers.
 * Specifies the stride of the sliding window for each dimension of "x".
 * The N and C dimensions must be 1. Has the same format as "x".
 * @li pads: Required. A tuple/list of 6 integers.
 * @li dilations: Optional. A tuple/list of 5 integers, The dilation factor for each
 * dimension of input.
 * The N, C and D dimensions must be 1. Has the same format as "x".
 * @li groups: Optional. Number of blocked connections from input channels to output
 * channels.
 * @li data_format: Optional. An optional string from: "NDHWC", "NCDHW".
 * Defaults to "NDHWC". Specify the data format of the input and output data.
 * @li output_padding: Optional. The size will be added in the output shape.
 * @li offset_x: Optional. Input offset_x value. Reserved. \n

*@par Outputs:
 * y: A Tensor. Has the same format as "x", has the type float16, float32. \n

*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv3DTranspose instead.
*/
REG_OP(Conv3DTransposeD)
    .INPUT(x, TensorType({DT_FLOAT16}))
    .INPUT(filter, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT32}))
    .REQUIRED_ATTR(input_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NDHWC")
    .ATTR(output_padding, ListInt, {0, 0, 0, 0, 0})
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv3DTransposeD)

/**
*@brief Computes the transpose of convolution 2d with respect to the input.
*@par Inputs:
 * Five inputs:
 * @li input_size: A Tensor of type int32 or int64. An integer vector
 * representing the shape of input, where input is a 4-D tensor
 * [batch, height, width, channels] or [batch, channels, height, width].
 * @li x: A Tensor of type float16, int8. 4-D with shape [batch, out_height,
 * out_width, out_channels] or [batch, out_channels, out_height, out_width].
 * @li filter: A Tensor of type float16, int8. Must have the same type as "x".
 * 4-D with shape [filter_height, filter_width, in_channels, out_channels]
 * or [out_channels, filter_height, filter_width, in_channels]
 * or [out_channels, in_channel, filter_height, filter_width].
 * @li bias: An optional 1D tensor of type float16, float32, int32.
 *  Format is "ND".
 * @li offset_w: An optional 1D tensor for quantized inference. Reserved.
 *\n
 *\n
 * The following are the supported data types and data formats:\n
 *\n
 *\n
    | Tensor    | x       | filter  | bias    | y      |\n
    |-----------|---------|---------|---------|--------|\n
    | Data Type | float16 | float16 | float16 | float16|\n
    |           | float16 | float16 | float32 | float32|\n
    | Format    | NCHW    | NCHW    | ND      | NCHW   |\n
    |           | NHWC    | HWCN    |         | NHWC   |\n
 *\n
 * For int8, a dequant or requant operator must be followed.
 *\n
 *
*@par Required Attributes:
 * @li strides: A required tuple/list of 4 integers. The stride of the sliding
 * window for H/W dimension. The index of H/W is same as data_format.
 * @li pads: A required tuple/list of 4 integers, [top, bottom, left, right]
 * pads on feature map.
*@par Attributes:
 * Five attributes:
 * @li groups: Number of blocked connections from input channels to output
 * channels.
 * Defaults to "1".
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each
 * dimension of input. Must be [1, 1, 1, 1].
 * @li data_format: An optional string from: "NHWC", "NCHW".
 * Defaults to "NHWC". Specify the data format of the input and output data.
 * @li output_padding: The size will be added in the output shape. Defaults
 * to [0, 0, 0, 0].
 * @li offset_x: An optional int. Input offset, used for quantized inference.
 * The negative offset added to the input image for int8 type. Ensure offset_x
 * within the effective range of int8 [-128, 127]. Defaults to "0".
 *\n
 *\n
 * The following value range restrictions must be met:\n
 *\n
 *\n
    | Name             | Field    | Scope        |\n
    |------------------|----------|--------------|\n
    | input_size       | H        | [1, 4096]    |\n
    |                  | W        | [1, 4096]    |\n
    | x (out_backprop) | H*strideH| [1, 4096]    |\n
    |                  | W*strideW| [1, 4096]    |\n
    | filter           | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | y (fmap)         | H        | [1, 4096]    |\n
    |                  | W        | [1, 4096]    |\n
    | Stride           | H        | [1, 63]      |\n
    |                  | W        | [1, 63]      |\n
    | Padding          | Top      | [0, 255]     |\n
    |                  | Bottom   | [0, 255]     |\n
    |                  | Left     | [0, 255]     |\n
    |                  | Right    | [0, 255]     |\n
    | Dilation         | H        | [1, 255]     |\n
    |                  | W        | [1, 255]     |\n
    | Offset_x         |          | [-128, 127]  |\n
 *\n
 * In Ascend910, fmap or out_backprop's H and W not support 1 when\n
 * fmap_h + pad_top + pad_bottom != (filter_height - 1) * dilation_h + 1
 * and filter_width > fmap_width.
 * If filter_h = 1 and filter_w = 1, out_backprop_w * stride_h * stride_w
 *  < 4096. \n
 *
*@par Outputs:
 * y: A Tensor. A Tensor of type float16, int32, float32, and has
 *  same format as input_size.
 *\n
 *     out_backprop_height = (fmap_height + pad_top + pad_bottom -
 *                           (dilation_h * (filter_height - 1) + 1))
 *                           / stride_h + 1
 *\n
 *     out_backprop_width = (fmap_width + pad_left + pad_right -
 *                          (dilation_w * (filter_width - 1) + 1))
 *                          / stride_w + 1
 *\n
 *
*/
REG_OP(Conv2DTranspose)
    .INPUT(input_size, TensorType({DT_INT32, DT_INT64}))
    .INPUT(x, TensorType({DT_FLOAT16, DT_INT8}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .ATTR(output_padding, ListInt, {0, 0, 0, 0})
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv2DTranspose)

/**
*@brief Computes the transpose of convolution 2d with respect to the input.
* @par Inputs:
 * Four inputs:
 * @li x: A Tensor of type float16, int8.
 * @li filter: A Tensor of type float16, int8. Must have the same type as "x".
 * @li bias: An optional 1D tensor of the same type as "x".
 * @li offset_w: An optional 1D tensor for quantized inference. Type is int8.
*@par Required Attributes:
 * @li input_size: A Tensor of type int32 or int64. An integer vector representing the
 * shape of input.
 * @li strides: A required list or tuple. The stride of the sliding window for
 * height and width for H/W dimension.
 * @li pads: A required list or tuple of int32. Padding added to each dimension
 * of the input.
*@par Attributes:
 * Five attributes:
 * @li groups: Number of blocked connections from input channels to output channels.
 * Defaults to "1".
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each dimension
 * of input. Must be [1, 1, 1, 1].
 * @li data_format: An optional string from: "NHWC", "NCHW". Defaults to "NHWC".
 * Specify the data format of the input and output data.
 * @li output_padding: The size will be added in the output shape. Defaults
 * to [0, 0, 0, 0].
 * @li offset_x: An optional int. Input offset, used for quantized inference.
 * Defaults to "0".
*@par Outputs:
 * y: A Tensor. Has the same type as "filter".
*@par Restrictions:
 * Warning: THIS FUNCTION IS DEPRECATED. Please use Conv2DTranspose instead.
*/
REG_OP(Conv2DTransposeD)
    .INPUT(x, TensorType({DT_FLOAT16, DT_INT8}))
    .INPUT(filter, TensorType({DT_FLOAT16, DT_INT8}))
    .OPTIONAL_INPUT(bias, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .OPTIONAL_INPUT(offset_w, TensorType({DT_INT8}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_INT32, DT_FLOAT}))
    .REQUIRED_ATTR(input_size, ListInt)
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(groups, Int, 1)
    .ATTR(data_format, String, "NHWC")
    .ATTR(output_padding, ListInt, {0, 0, 0, 0})
    .ATTR(offset_x, Int, 0)
    .OP_END_FACTORY_REG(Conv2DTransposeD)

/**
*@brief Computes the deformed convolution output with the expected input
* @par Inputs:
 * Two inputs:
 * @li x: A Tensor of type float16,float32
 * @li offsets: A Tensor of type float16,float32.Deformation offset parameter.
*@par Attributes:
 * @li strides: A tuple/list of 4 integers.The stride of the sliding window for
 * height and width for H/W dimension.
 * @li pads: A tuple/list of 4 integers.Padding added to H/W dimension
 * of the input.
 * @li ksize: A tuple/list of 2 integers.kernel size.
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each dimension
 * of input.  Defaults to [1, 1, 1, 1]
 * @li data_format: An optional string from: "NCHW", "NHWC". Defaults to "NCHW". Specify the data format of the input x.
 * @li deformable_groups: Specify the c-axis grouping number of input x.
 * @li modulated: Specify version of DeformableConv2D, true means v2, false means v1
*@par Outputs:
 * y: A Tensor. A Tensor of type float16, float32.
*/
REG_OP(DeformableOffsets)
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT}))
    .INPUT(offsets, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(y, TensorType({DT_FLOAT16, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .REQUIRED_ATTR(ksize, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(data_format, String, "NCHW")
    .ATTR(deformable_groups, Int, 1)
    .ATTR(modulated, Bool, true)
    .OP_END_FACTORY_REG(DeformableOffsets)

/**
*@brief Computes the gradients of DeformableOffsets with respect to input and offsets
* @par Inputs:
 * Three inputs:
 * @li grad: A Tensor of type float16,float32. gradients with respect to DeformableOffsets output
 * @li x: A Tensor of type float16,float32.
 * @li offsets: A Tensor of type float16,float32.Deformation offset parameter.
*@par Attributes:
 * @li strides: A tuple/list of 4 integers.The stride of the sliding window for
 * height and width for H/W dimension.
 * @li pads: A tuple/list of 4 integers.Padding added to H/W dimension
 * of the input.
 * @li ksize: A tuple/list of 2 integers.kernel size.
 * @li dilations: A tuple/list of 4 integers, The dilation factor for each dimension
 * of input.  Defaults to [1, 1, 1, 1]
 * @li data_format: An optional string from: "NCHW", "NHWC". Defaults to "NCHW". Specify the data format of the input x.
 * @li deformable_groups: Specify the c-axis grouping number of input x.
 * @li modulated: Specify version of DeformableConv2D, true means v2, false means v1.
*@par Outputs:
 * @li grad_x: A Tensor of type float16, float32. Gradients with respect to input_x
 * @li grad_offsets: A Tensor of type float16, float32. Gradients with respect to input_offsets
*/
REG_OP(DeformableOffsetsGrad)
    .INPUT(grad, TensorType({DT_FLOAT16, DT_FLOAT}))
    .INPUT(x, TensorType({DT_FLOAT16, DT_FLOAT}))
    .INPUT(offsets, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(grad_x, TensorType({DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(grad_offsets, TensorType({DT_FLOAT16, DT_FLOAT}))
    .REQUIRED_ATTR(strides, ListInt)
    .REQUIRED_ATTR(pads, ListInt)
    .REQUIRED_ATTR(ksize, ListInt)
    .ATTR(dilations, ListInt, {1, 1, 1, 1})
    .ATTR(data_format, String, "NCHW")
    .ATTR(deformable_groups, Int, 1)
    .ATTR(modulated, Bool, true)
    .OP_END_FACTORY_REG(DeformableOffsetsGrad)

/**
*@brief Computes the deformed dilation output with the expected input
* @par Inputs:
 * One inputs:
 * x: A Tensor of type int8, float16, float32
*@par Attributes:
 * @li dilations: A tuple/list of integers.
 * @li padding_value: default value filling in blank
 * @li pads: A tuple/list of integers.
*@par Outputs:
 * y: A Tensor. A Tensor of type int8, float16, float32.
*/
REG_OP(Dilation)
    .INPUT(x, TensorType({DT_INT8, DT_FLOAT16, DT_FLOAT}))
    .OUTPUT(y, TensorType({DT_INT8, DT_FLOAT16, DT_FLOAT}))
    .REQUIRED_ATTR(dilations, ListInt)
    .ATTR(pads, ListInt, {})
    .ATTR(padding_value, Float, 0.0)
    .OP_END_FACTORY_REG(Dilation)

/**
*@brief Computes the post-cube processing output with the expected input
* @par Inputs:
 * Ten inputs:
 * x1: A Tensor of type float16, bfloat16, float32, int32
 * x2: A Tensor of type float16, int8, int4
 * quant_scale_0: A Tensor of type uint64
 * relu_weight_0: A Tensor of type float32
 * clip_value_0: A Tensor of type float16, int8, int4
 * quant_scale_1: A Tensor of type uint64
 * relu_weight_1: A Tensor of type float32
 * clip_value_1: A Tensor of type float16
 * anti_quant_scale: A Tensor of type float16
 * anti_quant_offset: A Tensor of type int8, int4
*@par Attributes:
 * @li fusion_op_list: A list of String.
 * @li unit_list: A list of String
 * @li eltwise_mode: An optional string from "ADD", "SUB" and "".
*@par Outputs:
 * output: A Tensor. A Tensor of type float16, bfloat16, float32, int32, int8, int4.
*/
REG_OP(FixPipe)
    .INPUT(x1, TensorType({DT_FLOAT16, DT_BF16, DT_FLOAT, DT_INT32}))
    .OPTIONAL_INPUT(x2, TensorType({DT_FLOAT16, DT_INT8, DT_INT4}))
    .OPTIONAL_INPUT(quant_scale_0, TensorType({DT_UINT64}))
    .OPTIONAL_INPUT(relu_weight_0, TensorType({DT_FLOAT}))
    .OPTIONAL_INPUT(clip_value_0, TensorType({DT_FLOAT16, DT_INT8, DT_INT4}))
    .OPTIONAL_INPUT(quant_scale_1, TensorType({DT_UINT64}))
    .OPTIONAL_INPUT(relu_weight_1, TensorType({DT_FLOAT}))
    .OPTIONAL_INPUT(clip_value_1, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(anti_quant_scale, TensorType({DT_FLOAT16}))
    .OPTIONAL_INPUT(anti_quant_offset, TensorType({DT_INT8, DT_INT4}))
    .OUTPUT(output, TensorType({DT_FLOAT16, DT_BF16, DT_FLOAT, DT_INT32, DT_INT8, DT_INT4}))
    .REQUIRED_ATTR(fusion_op_list, ListString)
    .REQUIRED_ATTR(unit_list, ListString)
    .ATTR(eltwise_mode, String, "")
    .OP_END_FACTORY_REG(FixPipe)

/**
* @brief Solves a batch of isotonic regression problems. \n

* @par Inputs:
* @li input: A Tensor.  \n

* @par Attributes:
* @li output_dtype: The data type of output. \n

* @par Outputs:
* @li output: A Tensor. A Tensor of type float16, float32, double.
* @li segments: A Tensor. A Tensor of type int32 \n
*/
REG_OP(IsotonicRegression)
    .INPUT(input, TensorType::RealNumberType())
    .OUTPUT(output, TensorType({DT_FLOAT16, DT_FLOAT, DT_DOUBLE}))
    .OUTPUT(segments, TensorType({DT_INT32}))
    .ATTR(output_dtype, Type, DT_FLOAT)
    .OP_END_FACTORY_REG(IsotonicRegression)
}  // namespace ge
#endif  // OPS_BUILT_IN_OP_PROTO_INC_NN_CALCULATION_OPS_H_