graphengine/ge/graph/preprocess/graph_preprocess.cc

/**
 * Copyright 2020 Huawei Technologies Co., Ltd
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "graph/preprocess/graph_preprocess.h"
#include <map>
#include <set>
#include <string>
#include "common/formats/format_transfers/format_transfer_fractal_nz.h"
#include "common/formats/format_transfers/format_transfer_fractal_z.h"
#include "common/formats/format_transfers/format_transfer_nchw_nc1hwc0.h"
#include "common/formats/format_transfers/format_transfer_nhwc_nc1hwc0.h"
#include "common/formats/format_transfers/format_transfer_transpose.h"
#include "common/formats/utils/formats_trans_utils.h"
#include "common/helper/model_helper.h"
#include "common/math/math_util.h"
#include "common/op/ge_op_utils.h"
#include "graph/common/ge_call_wrapper.h"
#include "graph/common/local_context.h"
#include "graph/common/transop_util.h"
#include "graph/ge_context.h"
#include "graph/shape_refiner.h"
#include "graph/manager/graph_var_manager.h"
#include "graph/manager/util/rt_context_util.h"
#include "graph/optimize/graph_optimize.h"
#include "graph/passes/addn_pass.h"
#include "graph/passes/aicpu_constant_folding_pass.h"
#include "graph/passes/assert_pass.h"
#include "graph/passes/assign_pass.h"
#include "graph/passes/common_subexpression_elimination_pass.h"
#include "graph/passes/cond_pass.h"
#include "graph/passes/cond_remove_pass.h"
#include "graph/passes/constant_folding_pass.h"
#include "graph/passes/dimension_adjust_pass.h"
#include "graph/passes/dimension_compute_pass.h"
#include "graph/passes/dropout_pass.h"
#include "graph/passes/enter_pass.h"
#include "graph/passes/for_pass.h"
#include "graph/passes/guarantee_const_pass.h"
#include "graph/passes/hccl_group_pass.h"
#include "graph/passes/identity_pass.h"
#include "graph/passes/infershape_pass.h"
#include "graph/passes/net_output_pass.h"
#include "graph/passes/no_use_reshape_remove_pass.h"
#include "graph/passes/parallel_concat_start_op_pass.h"
#include "graph/passes/placeholder_with_default_pass.h"
#include "graph/passes/prevent_gradient_pass.h"
#include "graph/passes/print_op_pass.h"
#include "graph/passes/prune_pass.h"
#include "graph/passes/replace_transshape_pass.h"
#include "graph/passes/replace_with_empty_const_pass.h"
#include "graph/passes/resource_pair_add_control_pass.h"
#include "graph/passes/resource_pair_remove_control_pass.h"
#include "graph/passes/save_pass.h"
#include "graph/passes/shape_operate_op_remove_pass.h"
#include "graph/passes/snapshot_pass.h"
#include "graph/passes/stop_gradient_pass.h"
#include "graph/passes/unused_const_pass.h"
#include "graph/passes/var_is_initialized_op_pass.h"
#include "graph/passes/variable_prepare_op_pass.h"
#include "graph/preprocess/insert_op/util_insert_aipp_op.h"
#include "graph/utils/type_utils.h"
#include "inc/pass_manager.h"
#include "init/gelib.h"
#include "multi_batch_copy_graph.h"

#include "graph/passes/data_pass.h"
#include "graph/passes/mark_agnostic_pass.h"

namespace ge {
namespace {
static std::map<std::string, ge::DataType> output_type_str_to_datatype = {
    {"FP32", ge::DT_FLOAT},    {"FP16", ge::DT_FLOAT16},  {"INT8", ge::DT_INT8},    {"INT16", ge::DT_INT16},
    {"UINT16", ge::DT_UINT16}, {"UINT8", ge::DT_UINT8},   {"INT32", ge::DT_INT32},  {"INT64", ge::DT_INT64},
    {"UINT32", ge::DT_UINT32}, {"UINT64", ge::DT_UINT64}, {"DOUBLE", ge::DT_DOUBLE}};

const char *const kMbatchSwitchnName = "mbatch-switch-name";

// the size of user defined output datatype or format string after split by ":".
const size_t kUserDefinedElementCount = 2;
const int kDataOutIndex = 0;
const int64_t kInvalidDynaimcDimsType = -1;

OpDescPtr CreateTensorShape(const GeTensorDesc &data_tensor) {
  GeTensorPtr tensor = MakeShared<GeTensor>();
  if (tensor == nullptr) {
    GELOGE(INTERNAL_ERROR, "Create shared ptr for GeTensor failed");
    return nullptr;
  }
  tensor->MutableTensorDesc().SetDataType(DT_INT32);
  tensor->MutableTensorDesc().SetFormat(FORMAT_ND);
  auto dst_ge_shape = data_tensor.GetShape();
  auto dim_cnt = static_cast<int64_t>(dst_ge_shape.GetDimNum());
  if (dim_cnt == 0) {  // if the dim_cnt is 0, the tensor is a scalar
    tensor->MutableTensorDesc().SetShape(GeShape());
    int32_t dst_shape = 1;
    if (tensor->SetData(reinterpret_cast<const uint8_t *>(&dst_shape), sizeof(int32_t)) != GRAPH_SUCCESS) {
      GELOGE(INTERNAL_ERROR, "tensor set data failed");
      return nullptr;
    }
  } else {
    tensor->MutableTensorDesc().SetShape(GeShape(std::vector<int64_t>({dim_cnt})));
    unique_ptr<int32_t[]> dst_shape(new (std::nothrow) int32_t[dim_cnt]());
    if (dst_shape == nullptr) {
      GELOGE(INTERNAL_ERROR, "Create unique ptr failed");
      return nullptr;
    }
    for (int64_t i = 0; i < dim_cnt; ++i) {
      dst_shape[i] = dst_ge_shape.GetDim(static_cast<size_t>(i));
    }

    GE_IF_BOOL_EXEC(
        tensor->SetData(reinterpret_cast<const uint8_t *>(dst_shape.get()), dim_cnt * sizeof(int32_t)) != GRAPH_SUCCESS,
        GELOGE(INTERNAL_ERROR, "tensor set data failed");
        return nullptr;)
  }

  GELOGD("Create shape input dim [%s]", dst_ge_shape.ToString().c_str());
  return OpDescUtils::CreateConstOp(tensor);
}

void AddTransNodeAttr(const std::string &node_type, const GeTensorDesc &input, const GeTensorDesc &output,
                      OpDescPtr &op_desc) {
  // For format transfer node, the IR definition has src/dst format attrs
  if (node_type == TRANSDATA) {
    GE_IF_BOOL_EXEC(
        !AttrUtils::SetStr(op_desc, FORMAT_TRANSFER_SRC_FORMAT, TypeUtils::FormatToSerialString(input.GetFormat())),
        GELOGW("SetStr FORMAT_TRANSFER_SRC_FORMAT failed");)
    GE_IF_BOOL_EXEC(
        !AttrUtils::SetStr(op_desc, FORMAT_TRANSFER_DST_FORMAT, TypeUtils::FormatToSerialString(output.GetFormat())),
        GELOGW("SetStr FORMAT_TRANSFER_DST_FORMAT failed");)
  }

  // For TransposeD node, the IR definition has perm attrs
  if (node_type == TRANSPOSED) {
    Format src_format = input.GetFormat();
    Format dst_format = output.GetFormat();
    std::vector<int64_t> perm_arg;
    GE_CHK_BOOL_EXEC_WARN(formats::GetPermByForamt(src_format, dst_format, perm_arg) == SUCCESS, return,
                          "Get perm by foramt failed.");
    GE_CHK_BOOL_EXEC_WARN(AttrUtils::SetListInt(op_desc, PERMUTE_ATTR_PERM, perm_arg), return,
                          "SetStr PERMUTE_ATTR_PERM failed")
  }
  // For cast node, the IR definition has src/dst attrs
  if (node_type == CAST) {
    GE_IF_BOOL_EXEC(!AttrUtils::SetInt(op_desc, CAST_ATTR_SRCT, static_cast<int64_t>(input.GetDataType())),
                    GELOGW("SetInt CAST_ATTR_SRCT failed");)
    GE_IF_BOOL_EXEC(!AttrUtils::SetInt(op_desc, CAST_ATTR_DSTT, static_cast<int64_t>(output.GetDataType())),
                    GELOGW("SetInt CAST_ATTR_DSTT failed");)
    GE_IF_BOOL_EXEC(!AttrUtils::SetInt(op_desc, CAST_ATTR_DST_TYPE, static_cast<int64_t>(output.GetDataType())),
                    GELOGW("SetInt CAST_ATTR_DST_TYPE failed");)
    GE_IF_BOOL_EXEC(!AttrUtils::SetBool(op_desc, CAST_ATTR_TRUNCATE, false),
                    GELOGW("SetBool CAST_ATTR_TRUNCATE failed");)
  }
}

NodePtr CreateTransNode(const std::string &name, const std::string &node_type, const GeTensorDesc &input,
                        const GeTensorDesc &output, NodePtr &node) {
  if (node == nullptr) {
    GELOGE(PARAM_INVALID, "node is null.");
    return nullptr;
  }
  auto graph = node->GetOwnerComputeGraph();
  if (graph == nullptr) {
    GELOGE(PARAM_INVALID, "Owner graph is null, node name:%s.", node->GetName().c_str());
    return nullptr;
  }

  auto index = TransOpUtil::GetTransOpDataIndex(node_type);
  if (index < 0) {
    ErrorManager::GetInstance().ATCReportErrMessage(
        "E19025", {"situation", "reason"},
        {"The trans node type[" + node_type + "]", "it must be " + TransOpUtil::TransopMapToString()});
    GELOGE(INTERNAL_ERROR, "The trans node type %s does not exists", node_type.c_str());
    return nullptr;
  }
  OpDescPtr op_desc = MakeShared<OpDesc>(name, node_type);
  if (op_desc == nullptr) {
    GELOGE(INTERNAL_ERROR, "Create shared ptr for OpDesc failed");
    return nullptr;
  }

  // for data dump
  GE_IF_BOOL_EXEC(
      !AttrUtils::SetListStr(op_desc, ATTR_NAME_DATA_DUMP_ORIGIN_OP_NAMES, std::move(std::vector<std::string>())),
      GELOGW("CreateTransNode: SetListStr failed");)

  // Default single input and single output
  auto ret = op_desc->AddInputDesc(input);
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to add input desc when create node %s type %s", name.c_str(), node_type.c_str());
    return nullptr;
  }
  ret = op_desc->AddOutputDesc(output);
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to add output desc when create node %s type %s", name.c_str(), node_type.c_str());
    return nullptr;
  }

  AddTransNodeAttr(node_type, input, output, op_desc);

  NodePtr shape_node = nullptr;
  if (node_type == RESHAPE) {
    auto shape_desc = CreateTensorShape(output);
    if (shape_desc == nullptr) {
      GELOGE(INTERNAL_ERROR, "Failed to add shape for reshape %s, can not create the shape input",
             node->GetName().c_str());
      return nullptr;
    }
    ret = op_desc->AddInputDesc(shape_desc->GetOutputDesc(0));
    if (ret != GRAPH_SUCCESS) {
      GELOGE(INTERNAL_ERROR, "Failed to add the first input for reshape %s", name.c_str());
      return nullptr;
    }

    shape_node = graph->AddNode(shape_desc);
    if (shape_node == nullptr) {
      GELOGE(INTERNAL_ERROR, "Failed to add shape node for reshape %s, can not add the shape to graph", name.c_str());
      return nullptr;
    }
  }

  auto trans_node = graph->AddNode(op_desc);
  if (trans_node == nullptr) {
    GELOGE(INTERNAL_ERROR, "Failed to add trans node %s to graph", name.c_str());
    return nullptr;
  }

  if (node_type == RESHAPE) {
    if (GraphUtils::AddEdge(shape_node->GetOutDataAnchor(0), trans_node->GetInDataAnchor(1)) != GRAPH_SUCCESS) {
      GELOGE(INTERNAL_ERROR, "Failed to add shape node for reshape %s, can not add the edge", name.c_str());
      return nullptr;
    }
  }

  return trans_node;
}

Status RecoverOneTransNodeForVar(const std::string &name, const TransNodeInfo &trans_node_info, NodePtr node,
                                 NodePtr &trans_node) {
  GE_CHECK_NOTNULL(node);
  trans_node = CreateTransNode(name, trans_node_info.node_type, trans_node_info.output, trans_node_info.input, node);
  if (trans_node == nullptr) {
    return INTERNAL_ERROR;
  }

  auto ret = GraphUtils::ReplaceNodeDataAnchors(trans_node, node, {}, {0});
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to replace out anchors when recover trans node for %s type %s",
           node->GetName().c_str(), node->GetType().c_str());
    return INTERNAL_ERROR;
  }

  ret = GraphUtils::AddEdge(node->GetOutDataAnchor(0), trans_node->GetInDataAnchor(0));
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to connect node %s to trans node %s", node->GetName().c_str(),
           trans_node->GetName().c_str());
    return INTERNAL_ERROR;
  }

  ret = GraphUtils::MoveOutCtrlEdges(node, trans_node);
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to move out control edges from %s to %s when recover trans node.",
           node->GetName().c_str(), trans_node->GetName().c_str());
    return INTERNAL_ERROR;
  }

  return SUCCESS;
}

Status RecoverOneTransNodeForVarRef(const std::string &name, const TransNodeInfo &trans_node_info, NodePtr node,
                                    NodePtr &trans_node) {
  GE_CHECK_NOTNULL(node);
  trans_node = CreateTransNode(name, trans_node_info.node_type, trans_node_info.input, trans_node_info.output, node);
  if (trans_node == nullptr) {
    return INTERNAL_ERROR;
  }

  auto ret = GraphUtils::ReplaceNodeDataAnchors(trans_node, node, {0}, {});
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to replace int anchors when recover trans node for %s type %s",
           node->GetName().c_str(), node->GetType().c_str());
    return INTERNAL_ERROR;
  }

  ret = GraphUtils::AddEdge(trans_node->GetOutDataAnchor(0), node->GetInDataAnchor(0));
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to connect trans node %s to node %s", trans_node->GetName().c_str(),
           node->GetName().c_str());
    return INTERNAL_ERROR;
  }

  ret = GraphUtils::MoveInCtrlEdges(node, trans_node);
  if (ret != GRAPH_SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Failed to move int control edges from %s to %s when recover trans node.",
           node->GetName().c_str(), trans_node->GetName().c_str());
    return INTERNAL_ERROR;
  }

  return SUCCESS;
}

Status UpdateVarFormats(const NodePtr &var, const GeTensorDesc &tensor_desc) {
  GE_IF_BOOL_EXEC(var == nullptr, GELOGW("node : var is nullptr"); return INTERNAL_ERROR);
  GE_CHECK_NOTNULL(var->GetOpDesc());
  if (var->GetOpDesc()->GetOutputsSize() > 0) {
    auto output_desc = var->GetOpDesc()->GetOutputDesc(0);
    output_desc.SetFormat(tensor_desc.GetFormat());
    output_desc.SetDataType(tensor_desc.GetDataType());
    output_desc.SetShape(tensor_desc.GetShape());
    output_desc.SetOriginFormat(tensor_desc.GetOriginFormat());
    output_desc.SetOriginDataType(tensor_desc.GetOriginDataType());
    output_desc.SetOriginShape(tensor_desc.GetOriginShape());
    GE_IF_BOOL_EXEC(var->GetOpDesc()->UpdateOutputDesc(0, output_desc) != GRAPH_SUCCESS,
                    GELOGE(INTERNAL_ERROR, "UpdateOutputDesc failed");
                    return INTERNAL_ERROR;);
  }

  if (var->GetOpDesc()->GetInputsSize() > 0) {
    auto desc = var->GetOpDesc()->GetInputDesc(0);
    desc.SetFormat(tensor_desc.GetFormat());
    desc.SetDataType(tensor_desc.GetDataType());
    desc.SetShape(tensor_desc.GetShape());
    desc.SetOriginFormat(tensor_desc.GetOriginFormat());
    desc.SetOriginDataType(tensor_desc.GetOriginDataType());
    desc.SetOriginShape(tensor_desc.GetOriginShape());
    GE_IF_BOOL_EXEC(var->GetOpDesc()->UpdateInputDesc(0, desc) != GRAPH_SUCCESS,
                    GELOGE(INTERNAL_ERROR, "UpdateInputDesc failed");
                    return INTERNAL_ERROR;)
  }
  return SUCCESS;
}

Status RecoverTransRoadForVar(const NodePtr &var, const VarTransRoad &road) {
  GE_CHECK_NOTNULL(var);
  int index = 0;
  NodePtr last_node = var;
  for (auto iter = road.rbegin(); iter != road.rend(); ++iter) {
    auto trans_name = var->GetName() + "_trans_" + std::to_string(index++);
    auto ret = RecoverOneTransNodeForVar(trans_name, *iter, last_node, last_node);
    if (ret != SUCCESS) {
      ErrorManager::GetInstance().ATCReportErrMessage(
        "E15001", {"variable", "index", "type"}, {var->GetName(), std::to_string(index), iter->node_type});
      GELOGE(INTERNAL_ERROR, "Failed to recover trans node for variable %s, index %d, type %s", var->GetName().c_str(),
             index, iter->node_type.c_str());
      return INTERNAL_ERROR;
    }
    // set stream_label
    OpDescPtr var_desc = var->GetOpDesc();
    GE_CHECK_NOTNULL(var_desc);
    std::string stream_label;
    (void)AttrUtils::GetStr(var_desc, ATTR_NAME_STREAM_LABEL, stream_label);
    if (!stream_label.empty()) {
      GE_CHK_STATUS_RET(SetStreamLabel(last_node, stream_label), "set stream label failed");
    }
    GE_CHK_BOOL_EXEC((ge::AttrUtils::SetBool(last_node->GetOpDesc(), ge::ATTR_INSERTED_BY_GE, true)),
                     return INTERNAL_ERROR, "Set attr ATTR_INSERTED_BY_GE failed.");
    GELOGD("Recover trans node %s type %s success", trans_name.c_str(), iter->node_type.c_str());
  }
  if (road.empty()) {
    return SUCCESS;
  }
  return UpdateVarFormats(var, road.rbegin()->output);
}

Status RecoverTransRoadForVarRef(const std::set<NodePtr> &nodes, const VarTransRoad &road) {
  for (auto &var : nodes) {
    GE_CHECK_NOTNULL(var);
    int index = 0;
    NodePtr last_node = var;
    GELOGI("Recover trans nodes for variable ref %s", var->GetName().c_str());
    for (auto iter = road.rbegin(); iter != road.rend(); ++iter) {
      auto trans_name = var->GetName() + "_trans_" + std::to_string(index++);
      auto ret = RecoverOneTransNodeForVarRef(trans_name, *iter, last_node, last_node);
      if (ret != SUCCESS) {
        ErrorManager::GetInstance().ATCReportErrMessage(
            "E15001", {"variable", "index", "type"}, {var->GetName(), std::to_string(index), iter->node_type});
        GELOGE(INTERNAL_ERROR, "Failed to recover trans node for variable %s, index %d, type %s",
               var->GetName().c_str(), index, iter->node_type.c_str());
        return INTERNAL_ERROR;
      }
      // set stream_label
      OpDescPtr var_desc = var->GetOpDesc();
      GE_CHECK_NOTNULL(var_desc);
      std::string stream_label;
      (void)AttrUtils::GetStr(var_desc, ATTR_NAME_STREAM_LABEL, stream_label);
      if (!stream_label.empty()) {
        GE_CHK_STATUS_RET(SetStreamLabel(last_node, stream_label), "set stream label failed");
      }

      GE_CHK_BOOL_EXEC((ge::AttrUtils::SetBool(last_node->GetOpDesc(), ge::ATTR_INSERTED_BY_GE, true)),
                       return INTERNAL_ERROR, "Set attr ATTR_INSERTED_BY_GE failed.");
    }
    if (!(road.empty()) && (UpdateVarFormats(var, road.rbegin()->output) != SUCCESS)) {
      return INTERNAL_ERROR;
    }
  }
  return SUCCESS;
}

using VarNamesToRefs = std::map<std::string, std::set<NodePtr>>;

VarNamesToRefs CollectVarNamesToRefs(const ComputeGraphPtr &graph) {
  VarNamesToRefs names_to_refs;
  std::string var_name;
  if (graph == nullptr) {
    GELOGE(PARAM_INVALID, "graph is null.");
    return names_to_refs;
  }
  for (auto &node : graph->GetAllNodes()) {
    if (node->GetType() != VARIABLE) {
      continue;
    }
    if (AttrUtils::GetStr(node->GetOpDesc(), REF_VAR_SRC_VAR_NAME, var_name)) {
      (void)names_to_refs[var_name].insert(node);
    }
  }
  return names_to_refs;
}

Status TransferShape2NC1HWC0(Format src_format, const std::vector<int64_t> &src_shape, DataType dt, Format dst_format,
                             std::vector<int64_t> &dst_shape) {
  if (src_format == FORMAT_NCHW) {
    formats::FormatTransferNchwNc1hwc0 transfer;
    if (transfer.TransShape(src_format, src_shape, dt, dst_format, dst_shape) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "TransShape failed");
      return FAILED;
    }
  } else if (src_format == FORMAT_NHWC) {
    formats::FormatTransferNhwcNc1hwc0 transfer;
    if (transfer.TransShape(src_format, src_shape, dt, dst_format, dst_shape) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "TransShape failed");
      return FAILED;
    }
  }
  return SUCCESS;
}

Status ModifyInputFormatAndShape(NodePtr &node_ptr) {
  GE_CHECK_NOTNULL(node_ptr);
  auto op_desc = node_ptr->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  const GeTensorDescPtr &input = op_desc->MutableInputDesc(0);
  GE_CHECK_NOTNULL(input);
  ge::Format old_format = input->GetFormat();
  std::vector<int64_t> old_shape = input->GetShape().GetDims();
  ge::DataType dt = input->GetDataType();
  std::vector<int64_t> dst_shape_dims;
  if (TransferShape2NC1HWC0(old_format, old_shape, dt, FORMAT_NC1HWC0, dst_shape_dims) != SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Trans shape failed");
    return FAILED;
  }

  input->SetFormat(FORMAT_NC1HWC0);
  input->SetShape(ge::GeShape(dst_shape_dims));

  auto output = op_desc->MutableOutputDesc(0);
  GE_CHECK_NOTNULL(output);
  output->SetFormat(FORMAT_NC1HWC0);
  output->SetShape(ge::GeShape(dst_shape_dims));

  int64_t size = 0;
  graphStatus graph_status = TensorUtils::GetTensorMemorySizeInBytes(*output, size);
  if (graph_status != ge::GRAPH_SUCCESS) {
    GELOGE(graph_status, "GetTensorSizeInBytes failed!");
    return FAILED;
  }
  ge::TensorUtils::SetSize(*output, size);
  ge::TensorUtils::SetSize(*input, size);

  return SUCCESS;
}

Status ModifyFormatAndShapeForSingleTensor(const GeTensorDescPtr &input_output) {
  GE_CHECK_NOTNULL(input_output);
  ge::Format old_format = input_output->GetFormat();
  std::vector<int64_t> old_shape = input_output->GetShape().GetDims();
  ge::DataType dt = input_output->GetDataType();
  std::vector<int64_t> dst_shape_dims;
  if (TransferShape2NC1HWC0(old_format, old_shape, dt, FORMAT_NC1HWC0, dst_shape_dims) != SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Trans shape failed");
    return FAILED;
  }
  input_output->SetFormat(FORMAT_NC1HWC0);
  input_output->SetShape(ge::GeShape(dst_shape_dims));
  return SUCCESS;
}

Status ModifyDataNetOutputFormatAndShape(OpDescPtr &op_desc, uint32_t index, Format storage_format,
                                         vector<int64_t> &dst_shape_dims) {
  GE_CHECK_NOTNULL(op_desc);
  const GeTensorDescPtr &input = op_desc->MutableInputDesc(index);
  GE_CHECK_NOTNULL(input);
  ge::Format old_format = input->GetFormat();
  std::vector<int64_t> old_shape = input->GetShape().GetDims();

  input->SetShape(ge::GeShape(dst_shape_dims));
  input->SetFormat(storage_format);

  auto output = op_desc->MutableOutputDesc(index);
  GE_CHECK_NOTNULL(output);
  output->SetShape(ge::GeShape(dst_shape_dims));
  output->SetFormat(storage_format);

  if (!output->MutableShape().IsUnknownShape()) {
    int64_t size = 0;
    graphStatus graph_status = TensorUtils::GetTensorMemorySizeInBytes(*output, size);
    if (graph_status != ge::GRAPH_SUCCESS) {
      GELOGE(graph_status, "GetTensorSizeInBytes failed!");
      return FAILED;
    }
    ge::TensorUtils::SetSize(*input, size);
    ge::TensorUtils::SetSize(*output, size);

    GELOGI("Modify Data NetOutput format and shape success, node:%s, index:%d, old_shape:%s, old_Format:%s, "
           "new_shape:%s, new_format:%s, new_size:%lu",
           op_desc->GetName().c_str(), index, formats::JoinToString(old_shape).c_str(),
           ge::TypeUtils::FormatToSerialString(old_format).c_str(), formats::JoinToString(dst_shape_dims).c_str(),
           ge::TypeUtils::FormatToSerialString(storage_format).c_str(), size);
  }

  return SUCCESS;
}

Status CheckIfDynamicBatchScene(NodePtr &data_node, bool &is_dynamic_batch, NodePtr &switchn_node) {
  is_dynamic_batch = false;
  std::string related_node_name;
  if (AttrUtils::GetStr(data_node->GetOpDesc(), kMbatchSwitchnName, related_node_name)) {
    if (related_node_name.empty()) {
      ErrorManager::GetInstance().ATCReportErrMessage(
        "E15002", {"opname", "value", "reason"}, {data_node->GetName(), "flag", "but the value is empty"});
      GELOGE(INTERNAL_ERROR, "The data node %s has switchn node flag, but the value is empty",
             data_node->GetName().c_str());
      return INTERNAL_ERROR;
    }
    for (const NodePtr &next_node : data_node->GetOutNodes()) {
      if (next_node->GetName() == related_node_name) {
        switchn_node = next_node;
        break;
      }
    }
    if (switchn_node == nullptr) {
      ErrorManager::GetInstance().ATCReportErrMessage(
        "E15002", {"opname", "value", "reason"},
        {data_node->GetName(), related_node_name, "but can not find it on the graph"});
      GELOGE(INTERNAL_ERROR, "The data node %s has switchn node %s, but can not find it on the graph",
             data_node->GetName().c_str(), related_node_name.c_str());
      return INTERNAL_ERROR;
    }
    is_dynamic_batch = true;
  }
  return SUCCESS;
}

bool CheckOpType(const NodePtr &node, const std::string type) {
  if (node->GetType() == type) {
    return true;
  }
  return false;
}

Status CheckIfNeedSetNdFormat(const NodePtr &node_ptr) {
  auto op = node_ptr->GetOpDesc();
  GE_CHECK_NOTNULL(op);
  auto inputDescsPtr = op->GetAllInputsDescPtr();
  auto outputDescsPtr = op->GetAllOutputsDescPtr();
  ge::Format format = ge::FORMAT_ND;
  // if user set shape larger than 4, inferformat may set NCHW or NHWC, GE should set ND before FE
  // process, otherwise fe will insert transdata.
  for (auto &inputDescPtr : inputDescsPtr) {
    GE_CHECK_NOTNULL(inputDescPtr);
    if ((inputDescPtr->GetShape().GetDims().size() > ge::DIM_DEFAULT_SIZE) &&
        ((inputDescPtr->GetFormat() == ge::FORMAT_NCHW) || (inputDescPtr->GetFormat() == ge::FORMAT_NHWC))) {
      GELOGI("The node inputdesc [%s] format need to be set ND", op->GetName().c_str());
      inputDescPtr->SetFormat(format);
      inputDescPtr->SetOriginFormat(format);
    }
  }
  for (auto &outputDescPtr : outputDescsPtr) {
    GE_CHECK_NOTNULL(outputDescPtr);
    if ((outputDescPtr->GetShape().GetDims().size() > ge::DIM_DEFAULT_SIZE) &&
        ((outputDescPtr->GetFormat() == ge::FORMAT_NCHW) || (outputDescPtr->GetFormat() == ge::FORMAT_NHWC))) {
      GELOGI("The node outputdesc [%s] format need to be set ND", op->GetName().c_str());
      outputDescPtr->SetFormat(format);
      outputDescPtr->SetOriginFormat(format);
    }
  }
  return SUCCESS;
}

// A new function ending in 'DynShape' has been added for the dynamic shape processing.
// In the dynamic shape process, transnode insertion by FE is advanced to the stage of whole
// graph optimization, GE only sets the final data_type/format/shape information for variable,
// data and netoutput, and no longer inserts the transnode.
Status ProcessInputDtDynShape(NodePtr &node_ptr, bool &is_dynamic_batch, NodePtr &switchn_node, DataType &dt_set) {
  GE_CHECK_NOTNULL(node_ptr);
  auto op_desc = node_ptr->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  const GeTensorDescPtr &input = op_desc->MutableInputDesc(0);
  GE_CHECK_NOTNULL(input);
  ge::DataType src_dtype = input->GetDataType();
  if (src_dtype == dt_set) {
    GELOGI("The node name, %s dtype is fp16", node_ptr->GetName().c_str());
    return SUCCESS;
  }
  input->SetDataType(dt_set);
  int64_t input_shape_size = 0;
  int64_t output_shape_size = 0;
  ge::graphStatus input_graph_status = ge::TensorUtils::GetTensorSizeInBytes(*input, input_shape_size);
  ge::graphStatus output_graph_status = ge::TensorUtils::GetTensorMemorySizeInBytes(*input, output_shape_size);
  if (input_graph_status != ge::GRAPH_SUCCESS && output_graph_status != ge::GRAPH_SUCCESS) {
    GELOGE(GRAPH_FAILED, "GetTensorSize failed!");
    return FAILED;
  }
  ge::TensorUtils::SetSize(*input, input_shape_size);
  const GeTensorDescPtr &output = op_desc->MutableOutputDesc(0);
  GE_CHECK_NOTNULL(output);
  output->SetDataType(dt_set);
  ge::TensorUtils::SetSize(*output, output_shape_size);
  if (is_dynamic_batch) {
    GELOGI("The node [%s] dtype set fp16", switchn_node->GetName().c_str());
    auto switchn_op_desc = switchn_node->GetOpDesc();
    GE_CHECK_NOTNULL(switchn_op_desc);
    auto switchn_input = switchn_op_desc->MutableInputDesc(0);
    GE_CHECK_NOTNULL(switchn_input);
    switchn_input->SetDataType(dt_set);
    for (uint32_t i = 0; i < switchn_node->GetAllOutDataAnchorsSize(); ++i) {
      const GeTensorDescPtr &switchn_output = switchn_op_desc->MutableOutputDesc(i);
      GE_CHECK_NOTNULL(switchn_output);
      switchn_output->SetDataType(dt_set);
    }
  }
  return SUCCESS;
}

Status ProcessInputNC1HWC0DynShape(NodePtr &node_ptr, bool &is_dynamic_batch, NodePtr &switchn_node) {
  GE_CHECK_NOTNULL(node_ptr);
  auto op_desc = node_ptr->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  const GeTensorDescPtr &input = op_desc->MutableInputDesc(0);
  GE_CHECK_NOTNULL(input);
  ge::Format old_format = input->GetFormat();
  ge::GeShape old_shape = input->GetShape();
  bool support = ((old_format == FORMAT_NC1HWC0) || (old_format == FORMAT_NCHW) || (old_format == FORMAT_NHWC));
  if (!support) {
    ErrorManager::GetInstance().ATCReportErrMessage(
        "E19014", {"opname", "value", "reason"},
        {op_desc->GetName(), "format[" + TypeUtils::FormatToSerialString(old_format) + "]",
        "only support FORMAT_NC1HWC0,FORMAT_NCHW,FORMAT_NHWC"});
    GELOGE(INTERNAL_ERROR, "The format [%s] is unsupported", TypeUtils::FormatToSerialString(old_format).c_str());
    return FAILED;
  }
  if (ModifyInputFormatAndShape(node_ptr) != SUCCESS) {
    GELOGE(INTERNAL_ERROR, "modify format and shape failed");
    return FAILED;
  }
  if (is_dynamic_batch) {
    auto switchn_op_desc = switchn_node->GetOpDesc();
    GE_CHECK_NOTNULL(switchn_op_desc);
    const GeTensorDescPtr &switchn_input = switchn_op_desc->MutableInputDesc(0);
    if (ModifyFormatAndShapeForSingleTensor(switchn_input) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "modify format and shape failed");
      return FAILED;
    }
    for (uint32_t i = 0; i < switchn_node->GetAllOutDataAnchorsSize(); ++i) {
      auto switchn_output = switchn_op_desc->MutableOutputDesc(i);
      GE_CHECK_NOTNULL(switchn_output);
      old_format = switchn_output->GetFormat();
      old_shape = switchn_output->GetShape();
      if (ModifyFormatAndShapeForSingleTensor(switchn_output) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "modify format and shape failed");
        return FAILED;
      }
    }
  }
  return SUCCESS;
}

Status ProcessDataNodeDynShape(NodePtr &node_ptr) {
  auto op_desc = node_ptr->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  string set_dt_str;
  if (!ge::AttrUtils::GetStr(node_ptr->GetOpDesc(), ATTR_ATC_USER_DEFINE_DATATYPE, set_dt_str)) {
    return SUCCESS;
  }
  DataType dt_set = TypeUtils::SerialStringToDataType(set_dt_str);
  GELOGI("input_fp16 is found, the node name is %s.", node_ptr->GetName().c_str());
  bool is_dynamic_batch = false;
  NodePtr switchn_node = nullptr;
  if (CheckIfDynamicBatchScene(node_ptr, is_dynamic_batch, switchn_node)) {
    GELOGE(INTERNAL_ERROR, "CheckIfDynamicBatchScene failed");
    return FAILED;
  }
  if (ProcessInputDtDynShape(node_ptr, is_dynamic_batch, switchn_node, dt_set) != SUCCESS) {
    GELOGE(INTERNAL_ERROR, "ProcessInputFP16 failed");
    return FAILED;
  }
  // check if need to set format
  string set_format;
  bool ret = ge::AttrUtils::GetStr(node_ptr->GetOpDesc(), ATTR_ATC_USER_DEFINE_FORMAT, set_format);
  if (ret && (!set_format.empty()) && TypeUtils::SerialStringToFormat(set_format) == FORMAT_NC1HWC0) {
    GELOGI("The format of node [%s] should be set NC1HWC0.", node_ptr->GetName().c_str());
    if (ProcessInputNC1HWC0DynShape(node_ptr, is_dynamic_batch, switchn_node) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "ProcessInputNC1HWC0 failed");
      return FAILED;
    }
  }
  return SUCCESS;
}

Status GetStorageFormatAndShape(OpDescPtr &op_desc, const GeTensorDescPtr &tensor_desc_ptr,
                                Format &storage_format, vector<int64_t> &dst_shape_dims) {
  GE_CHECK_NOTNULL(op_desc);
  GE_CHECK_NOTNULL(tensor_desc_ptr);

  storage_format = FORMAT_RESERVED;
  int64_t format = FORMAT_RESERVED;
  dst_shape_dims.clear();
  if (ge::AttrUtils::GetInt(*tensor_desc_ptr, ATTR_NAME_STORAGE_FORMAT, format)) {
    storage_format = static_cast<Format>(format);
    vector<int32_t> storage_shape;
    if (ge::AttrUtils::GetListInt(*tensor_desc_ptr, ATTR_NAME_STORAGE_SHAPE, storage_shape)) {
      for (auto dim : storage_shape) {
        dst_shape_dims.push_back(static_cast<int64_t>(dim));
      }
      GELOGI("Update node by storage format, node: [%s], storage_format: [%s], storage_shape:[%s]",
             op_desc->GetName().c_str(), TypeUtils::FormatToSerialString(storage_format).c_str(),
             formats::JoinToString(storage_shape).c_str());
    } else {
      ErrorManager::GetInstance().ATCReportErrMessage(
          "15003", {"opname", "format"},
          {op_desc->GetName(), TypeUtils::FormatToSerialString(storage_format)});
      GELOGE(PARAM_INVALID, "Update node by storage format failed, storage_shape not set. "
             "node: [%s], storage_format [%s]",
             op_desc->GetName().c_str(), TypeUtils::FormatToSerialString(storage_format).c_str());
      return FAILED;
    }

    ge::Format old_format = tensor_desc_ptr->GetFormat();
    auto old_shape = tensor_desc_ptr->GetShape().GetDims();
    if (old_format == storage_format && old_shape == dst_shape_dims) {
      GELOGI("Update node by storage format, not changed.");
      storage_format = FORMAT_RESERVED;
      return SUCCESS;
    }
  }
  return SUCCESS;
}
Status ProcessNetoutputNodeFp16Nc1hwc0DynShape(GeTensorDesc &src_desc, GeTensorDescPtr &net_output_input_desc,
                                               NodePtr &node) {
  bool is_dynamic = CheckOpType(node, MERGE);
  auto src_op_desc = node->GetOpDesc();
  GE_CHECK_NOTNULL(src_op_desc);
  ge::GeShape src_shape = src_desc.GetShape();
  ge::Format src_format = src_desc.GetFormat();

  net_output_input_desc->SetDataType(DT_FLOAT16);
  if (is_dynamic) {
    auto merge_output = src_op_desc->MutableOutputDesc(0);
    GE_CHECK_NOTNULL(merge_output);
    merge_output->SetDataType(DT_FLOAT16);
    for (uint32_t i = 0; i < node->GetAllInDataAnchorsSize(); ++i) {
      auto merge_input = src_op_desc->MutableInputDesc(i);
      GE_CHECK_NOTNULL(merge_input);
      merge_input->SetDataType(DT_FLOAT16);
    }
  }
  std::vector<int64_t> dst_shape_dims;
  std::vector<int64_t> src_shape_dims = src_shape.GetDims();
  if (TransferShape2NC1HWC0(src_format, src_shape_dims, DT_FLOAT16, FORMAT_NC1HWC0, dst_shape_dims) != SUCCESS) {
    GELOGE(INTERNAL_ERROR, "Trans shape failed");
    return FAILED;
  }
  ge::GeShape dst_shape(dst_shape_dims);
  net_output_input_desc->SetFormat(FORMAT_NC1HWC0);
  net_output_input_desc->SetShape(dst_shape);
  if (is_dynamic) {
    auto merge_out = src_op_desc->MutableOutputDesc(0);
    GE_CHECK_NOTNULL(merge_out);
    if (ModifyFormatAndShapeForSingleTensor(merge_out) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "modify format and shape failed");
      return FAILED;
    }
    for (uint32_t i = 0; i < node->GetAllInDataAnchorsSize(); ++i) {
      auto merge_in = src_op_desc->MutableInputDesc(i);
      GE_CHECK_NOTNULL(merge_in);
      if (ModifyFormatAndShapeForSingleTensor(merge_in) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "modify format and shape failed");
        return FAILED;
      }
    }
  }
  return SUCCESS;
}

bool NeedUpdateDtByOutputTypeParm(OpDescPtr &netout_desc, uint32_t &index, ge::DataType &dt) {
  GE_CHECK_NOTNULL(netout_desc);
  vector<string> output_dt_str;
  if (ge::AttrUtils::GetListStr(netout_desc, ATTR_ATC_USER_DEFINE_DATATYPE, output_dt_str)) {
    for (auto dt_str : output_dt_str) {
      vector<string> dt_str_split = StringUtils::Split(dt_str, ':');
      if (dt_str_split.size() == kUserDefinedElementCount) {
        if (dt_str_split[0] == to_string(index)) {
          dt = TypeUtils::SerialStringToDataType(dt_str_split[1]);
          GELOGI("Find netoutput node output %u datatype should be set %s .", index,
                 TypeUtils::DataTypeToSerialString(dt).c_str());
          return true;
        }
      }
    }
  }
  return false;
}

bool NeedUpdateFormatByOutputTypeParm(OpDescPtr &netout_desc, uint32_t &index) {
  GE_CHECK_NOTNULL(netout_desc);
  vector<string> output_format_str;
  if (ge::AttrUtils::GetListStr(netout_desc, ATTR_ATC_USER_DEFINE_FORMAT, output_format_str)) {
    for (auto format_str : output_format_str) {
      vector<string> format_str_split = StringUtils::Split(format_str, ':');
      if (format_str_split.size() == kUserDefinedElementCount) {
        if (format_str_split[0] == to_string(index)) {
          GELOGI("Find netoutput node output %u format should be set NC1HWC0.", index);
          return true;
        }
      }
    }
  }
  return false;
}

Status ProcessNetoutputNodeDynShape(NodePtr &node) {
  auto op_desc = node->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  ge::DataType output_data_type = ge::DT_FLOAT;

  for (const auto &in_anchor : node->GetAllInDataAnchors()) {
    auto index = static_cast<uint32_t>(in_anchor->GetIdx());
    auto peer_out = in_anchor->GetPeerOutAnchor();
    GE_CHECK_NOTNULL(peer_out);
    auto src_node = peer_out->GetOwnerNode();
    GE_CHECK_NOTNULL(src_node);
    bool is_dynamic = CheckOpType(src_node, MERGE);

    OpDescPtr src_op_desc = src_node->GetOpDesc();
    GE_CHECK_NOTNULL(src_op_desc);
    auto net_output_input_desc = op_desc->MutableInputDesc(index);
    GE_CHECK_NOTNULL(net_output_input_desc);

    ge::GeShape old_shape = net_output_input_desc->GetShape();
    ge::Format old_format = net_output_input_desc->GetFormat();
    ge::DataType old_dtype = net_output_input_desc->GetDataType();
    // Update datatype
    if (NeedUpdateDtByOutputTypeParm(op_desc, index, output_data_type)) {
      GELOGI("Enter into process output_type schedule");
      net_output_input_desc->SetDataType(output_data_type);
      if (is_dynamic) {
        auto merge_output = src_op_desc->MutableOutputDesc(0);
        GE_CHECK_NOTNULL(merge_output);
        merge_output->SetDataType(output_data_type);
        for (uint32_t i = 0; i < src_node->GetAllInDataAnchorsSize(); ++i) {
          auto merge_input = src_op_desc->MutableInputDesc(i);
          GE_CHECK_NOTNULL(merge_input);
          merge_input->SetDataType(output_data_type);
        }
      }
    }
    // check if is_output_adjust_hw_layout is set
    if (NeedUpdateFormatByOutputTypeParm(op_desc, index)) {
      if ((old_format != FORMAT_NCHW) && (old_format != FORMAT_NHWC) && (old_format != FORMAT_NC1HWC0)) {
        ErrorManager::GetInstance().ATCReportErrMessage(
            "E19014", {"opname", "value", "reason"},
            {op_desc->GetName(), "format[" + TypeUtils::FormatToSerialString(old_format) + "]",
            "only support FORMAT_NC1HWC0,FORMAT_NCHW,FORMAT_NHWC"});
        GELOGE(INTERNAL_ERROR, "Format is not one of NCHW, NHWC, NC1HWC0.");
        return FAILED;
      }

      GeTensorDesc old_desc(old_shape, old_format, old_dtype);
      if (ProcessNetoutputNodeFp16Nc1hwc0DynShape(old_desc, net_output_input_desc, src_node) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Process netoutput fp16 nc1hwc0.");
        return FAILED;
      }
    }
  }
  return SUCCESS;
}
}  // namespace

GraphPrepare::GraphPrepare() : compute_graph_(nullptr) {}

GraphPrepare::~GraphPrepare() {}

/**
 * @param graph
 * @return
 */
Status GraphPrepare::UpdateVariableFormats(ComputeGraphPtr &graph) {
  GE_CHECK_NOTNULL(graph);
  auto var_names_to_refs = CollectVarNamesToRefs(graph);
  for (auto &node : graph->GetAllNodes()) {
    if (node == nullptr) {
      continue;
    }
    if (node->GetType() != VARIABLE) {
      continue;
    }
    auto trans_road = VarManager::Instance(graph->GetSessionID())->GetTransRoad(node->GetName());
    if (trans_road == nullptr) {
      GELOGD("The variable %s does not have any trans road", node->GetName().c_str());
      continue;
    }

    GELOGI("Recover the trans road for var %s reversely", node->GetName().c_str());

    auto ret = RecoverTransRoadForVar(node, *trans_road);
    if (ret != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "Failed to recovery trans road for var %s", node->GetName().c_str());
      return INTERNAL_ERROR;
    }
    auto iter = var_names_to_refs.find(node->GetName());
    if (iter != var_names_to_refs.end()) {
      ret = RecoverTransRoadForVarRef(iter->second, *trans_road);
      if (ret != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Failed to recovery trans road for var ref %s", node->GetName().c_str());
        return INTERNAL_ERROR;
      }
    }
  }

  return SUCCESS;
}

void GraphPrepare::SetOptions(const ge::GraphManagerOptions &options) { options_ = options; }

Status GraphPrepare::Init(const ge::Graph &graph, uint64_t session_id) {
  compute_graph_ = GraphUtils::GetComputeGraph(graph);
  if (compute_graph_ != nullptr) {
    compute_graph_->SetSessionID(session_id);
  }
  session_id_ = session_id;

  Status ret = CheckGraph();
  if (ret != SUCCESS) {
    GELOGE(ret, "RunGraph graph check fail, ret:%u", ret);
    return ret;
  }
  (void)compute_graph_->TopologicalSorting();
  ret = CheckRefOp();
  if (ret != SUCCESS) {
    GELOGE(ret, "RunGraph check ref op fail, ret:%u", ret);
    return ret;
  }
  return SUCCESS;
}

Status GraphPrepare::CheckGraph() {
  if (compute_graph_ == nullptr) {
    GELOGE(GE_GRAPH_INIT_FAILED, "Graph prepare init compute graph is NULLPTR");
    return GE_GRAPH_INIT_FAILED;
  }
  auto nodes = compute_graph_->GetAllNodes();
  if (nodes.empty()) {
    GELOGE(GE_GRAPH_INIT_FAILED, "Invalid graph, no nodes in this graph.");
    return GE_GRAPH_INIT_FAILED;
  }
  for (const NodePtr &node : compute_graph_->GetAllNodes()) {
    GE_CHECK_NOTNULL(node);
    if (node->GetOpDesc() == nullptr) {
      GELOGE(GE_GRAPH_INIT_FAILED, "Check Graph node opdesc is NULL");
      return GE_GRAPH_INIT_FAILED;
    }
  }
  return SUCCESS;
}

Status GraphPrepare::CheckRefInputNode(const NodePtr &node, const std::string &input_name,
                                       const std::set<NodePtr> &ref_nodes) {
  // Acceptable input types should be ref node, variable or Switch operator, which is issued by ME for dynamic
  // lossscale and would be optimized in SwitchToStreamSwitchPass.
  // Since ME dont differentiate between RefSwitch and Switch, and only issue Switch.
  static std::set<std::string> acceptable_types = {ge::VARIABLE,         ge::VARIABLEV2, ge::VARHANDLEOP,
                                                   ge::REFSWITCH,        ge::REFMERGE,   ge::REFENTER,
                                                   ge::REFNEXTITERATION, ge::REFEXIT,    ge::SWITCH};
  GE_CHECK_NOTNULL(node);
  const auto &op_desc = node->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  const auto input_index = op_desc->GetInputIndexByName(input_name);
  const auto &in_anchor = node->GetInDataAnchor(input_index);
  GE_CHECK_NOTNULL(in_anchor);
  const auto &peer_out_anchor = in_anchor->GetPeerOutAnchor();
  GE_CHECK_NOTNULL(peer_out_anchor);
  const auto &input_node = peer_out_anchor->GetOwnerNode();
  GE_CHECK_NOTNULL(input_node);
  const auto &input_op_desc = input_node->GetOpDesc();
  GE_CHECK_NOTNULL(input_op_desc);

  bool is_ref = (ref_nodes.find(input_node) != ref_nodes.end());
  if (is_ref) {
    return SUCCESS;
  }
  auto input_type = input_op_desc->GetType();
  if (input_type == ge::FRAMEWORKOP) {
    if (!ge::AttrUtils::GetStr(input_op_desc, ATTR_NAME_FRAMEWORK_ORIGINAL_TYPE, input_type)) {
      GELOGE(PARAM_INVALID, "Get original type failed.");
      return PARAM_INVALID;
    }
  }
  bool is_acceptable = (acceptable_types.find(input_type) != acceptable_types.end());
  if (!is_acceptable) {
    ErrorManager::GetInstance().ATCReportErrMessage(
        "E15005", {"opname", "optype", "opname1", "optype1"},
        {op_desc->GetName(), node->GetType(), input_op_desc->GetName(), input_op_desc->GetType()});
    GELOGE(PARAM_INVALID, "The ref input of ref node %s[%s] must be ref node or variable, but %s[%s]isn't.",
           node->GetName().c_str(), node->GetType().c_str(), input_op_desc->GetName().c_str(),
           input_op_desc->GetType().c_str());
    return PARAM_INVALID;
  }

  return SUCCESS;
}

Status GraphPrepare::CheckRefOp() {
  GE_CHECK_NOTNULL(compute_graph_);
  std::set<NodePtr> ref_nodes;
  for (const NodePtr &node : compute_graph_->GetDirectNode()) {
    if (node == nullptr) {
      GELOGE(PARAM_INVALID, "param [node] must not be null.");
      return PARAM_INVALID;
    }
    auto op_desc = node->GetOpDesc();
    if (op_desc == nullptr) {
      GELOGE(PARAM_INVALID, "OpDesc of param [node] must not be null.");
      return PARAM_INVALID;
    }

    auto input_name_index = op_desc->GetAllInputName();
    auto outputs = op_desc->GetAllOutputName();
    for (const auto &name_index : input_name_index) {
      if (op_desc->GetOutputIndexByName(name_index.first) != -1) {
        if (CheckRefInputNode(node, name_index.first, ref_nodes) != SUCCESS) {
          GELOGE(PARAM_INVALID, "CheckRefInputNode failed.");
          return PARAM_INVALID;
        }
        (void)ref_nodes.insert(node); // no need to check value
      }
    }
  }
  return SUCCESS;
};

Status GraphPrepare::SetRtContext(rtContext_t rt_context, rtCtxMode_t mode) {
  GE_CHECK_NOTNULL(compute_graph_);
  GELOGI("set rt_context, session id: %lu, graph id: %u, mode %d, device id:%u.", session_id_,
         compute_graph_->GetGraphID(), static_cast<int>(mode), ge::GetContext().DeviceId());

  GE_CHK_RT_RET(rtCtxCreate(&rt_context, mode, ge::GetContext().DeviceId()));
  GE_CHK_RT_RET(rtCtxSetCurrent(rt_context));
  RtContextUtil::GetInstance().AddRtContext(session_id_, compute_graph_->GetGraphID(), rt_context);

  return SUCCESS;
}

Status GraphPrepare::AdjustDataOpOutput(const NodePtr &node) {
  if (node == nullptr) {
    GELOGE(GE_GRAPH_GRAPH_NODE_NULL, "Input node is NULL");
    return GE_GRAPH_GRAPH_NODE_NULL;
  }
  OpDescPtr op_desc_ptr = node->GetOpDesc();
  if (op_desc_ptr == nullptr) {
    GELOGE(GE_GRAPH_GRAPH_NODE_NULL, "Input node opdesc is NULL");
    return GE_GRAPH_GRAPH_NODE_NULL;
  }
  GeTensorDesc output = op_desc_ptr->GetOutputDesc(0);
  int64_t tensor_size = 0;
  graphStatus graph_status = TensorUtils::GetTensorMemorySizeInBytes(output, tensor_size);
  if (graph_status != GRAPH_SUCCESS) {
    ErrorManager::GetInstance().ATCReportErrMessage(
        "E19012", {"function", "reason"}, {"GetTensorMemorySizeInBytes", "opname is " + node->GetName()});
    GELOGE(graph_status, "GetTensorMemorySizeInBytes failed!");
    return FAILED;
  }
  TensorUtils::SetSize(output, tensor_size);
  graphStatus graph_ret = op_desc_ptr->UpdateOutputDesc(0, output);
  if (graph_ret != GRAPH_SUCCESS) {
    GELOGE(graph_ret, "UpdateOutputDesc fail, graph_ret:%u", graph_ret);
    return graph_ret;
  }
  return SUCCESS;
}

Status GraphPrepare::UpdateInput(const std::vector<GeTensor> &user_input) {
  compute_graph_->SaveDataFormat(ge::TypeUtils::DomiFormatToFormat(GetLocalOmgContext().format));
  for (NodePtr &input_node : compute_graph_->GetDirectNode()) {
    GE_CHECK_NOTNULL(input_node);
    OpDescPtr op = input_node->GetOpDesc();
    GE_CHECK_NOTNULL(op);
    if (op->GetType() == DATA) {
      GeAttrValue::INT index = 0;
      if ((!(AttrUtils::GetInt(op, ATTR_NAME_INDEX, index))) || (GetLocalOmgContext().is_dynamic_input)) {
        GELOGW("Get index from data attr failed");
        continue;
      }

      if ((index < 0) || (static_cast<size_t>(index) >= user_input.size())) {
        std::string situation = "data op index[" + std::to_string(index) + "]";
        std::string reason = "it must less than user_input size[" + std::to_string(user_input.size()) + "]";
        ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"}, {situation, reason});
        GELOGE(PARAM_INVALID, "user_input size = %zu, graph data op index = %ld.", user_input.size(), index);
        return FAILED;
      }

      if (IsDynamicDims(input_node)) {
        continue;
      }
      GeTensorDesc desc(user_input[index].GetTensorDesc());
      auto format = desc.GetFormat();
      auto origin_format = desc.GetOriginFormat();
      // data maybe internal format [FRACTAL_NZ] at singleop process such as GEMM.
      bool need_check_internal_format = (!IsTansDataOpData(input_node)) && (!options_.is_single_op);
      if (need_check_internal_format) {
        bool is_internal = TypeUtils::IsInternalFormat(format) || TypeUtils::IsInternalFormat(origin_format);
        if (is_internal) {
          ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"},
          {"Input format[" +  TypeUtils::FormatToSerialString(format) + "] or origin_format[" +
          TypeUtils::FormatToSerialString(origin_format) + "]", "it is not support"});
          GELOGE(PARAM_INVALID, "Input format %s or origin_format %s is not support.",
                 TypeUtils::FormatToSerialString(format).c_str(),
                 TypeUtils::FormatToSerialString(origin_format).c_str());
          return FAILED;
        }
      }

      auto data_type = desc.GetDataType();
      uint32_t length = 1;
      bool type_ret = TypeUtils::GetDataTypeLength(data_type, length);
      if (!type_ret) {
        ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"},
        {"Input datatype[" + TypeUtils::DataTypeToSerialString(data_type) + "]", "it is not support"});
        GELOGE(PARAM_INVALID, "Input datatype %s is not support.",
               TypeUtils::DataTypeToSerialString(data_type).c_str());
        return FAILED;
      }
      int64_t desc_shape = desc.GetShape().GetShapeSize();
      FMK_INT64_UINT32_MULCHECK(desc_shape, length);
      int64_t shape_size = desc_shape * length;
      GE_IF_BOOL_EXEC(shape_size == 0 && desc.GetShape().GetDimNum() == 0, shape_size = static_cast<int64_t>(length));
      int64_t size = 0;
      GE_IF_BOOL_EXEC(ge::TensorUtils::GetSize(desc, size) != GRAPH_SUCCESS,
                      GELOGE(INTERNAL_ERROR, "TensorUtils GetSize failed");
                      return FAILED);
      bool size_check = (size != 0 && shape_size != size);
      if (size_check) {
        std::string situation = "input data size[" + std::to_string(size) +
            "] and shape_size[" + std::to_string(size) + "]";
        std::string reason = "because size != 0 and shape_size != size";
        ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"}, {situation, reason});
        GELOGE(PARAM_INVALID, "input data size =%ld, shape_size =%ld.", size, shape_size);
        return FAILED;
      }
      ge::TensorUtils::SetSize(desc, shape_size);
      graphStatus graph_ret = op->UpdateInputDesc(0, desc);
      if (graph_ret != GRAPH_SUCCESS) {
        GELOGE(graph_ret, "UpdateInputDesc fail, graph_ret:%u", graph_ret);
        return graph_ret;
      }
      // Size will be recalculated in the build stage
      ge::TensorUtils::SetSize(desc, 0);
      graph_ret = op->UpdateOutputDesc(0, desc);
      if (graph_ret != GRAPH_SUCCESS) {
        GELOGE(graph_ret, "UpdateOutputDesc fail, graph_ret:%u", graph_ret);
        return graph_ret;
      }

      if (!options_.train_graph_flag) {
        Status ret = AdjustDataOpOutput(input_node);
        GE_IF_BOOL_EXEC(ret != SUCCESS, GELOGE(ret, "AdjustDataOpOutput fail, ret:%u", ret); return ret);
      }
    }
  }

  return SUCCESS;
}

Status GraphPrepare::TryDoAipp() {
  // infer and with aipp configure file, then call aipp insert
  if ((!options_.train_graph_flag) && (!options_.insert_op_file.empty())) {
    GE_DUMP(compute_graph_, "Before_insert_aipp");
    Status ret = ge::InsertNewOpUtil::Instance().Init();
    if (ret != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "TryDoAipp: InsertNewOpUtil instance failed.");
      return INTERNAL_ERROR;
    }
    ret = ge::InsertNewOpUtil::Instance().Parse(options_.insert_op_file.c_str());
    if (ret != SUCCESS) {
      GELOGE(GE_GRAPH_OPTIMIZE_INSERT_OP_PARSE_FAILED, "TryDoAipp: parse config file %s failed",
             options_.insert_op_file.c_str());
      return GE_GRAPH_OPTIMIZE_INSERT_OP_PARSE_FAILED;
    }
    ret = ge::InsertNewOpUtil::Instance().InsertAippOps(compute_graph_, options_.insert_op_file);
    if (ret != SUCCESS) {
      GELOGE(GE_GRAPH_OPTIMIZE_INSERT_DYN_OP_FAILED, "TryDoAipp: insert aipp op ret failed, ret:%u", ret);
      return GE_GRAPH_OPTIMIZE_INSERT_DYN_OP_FAILED;
    }
  }
  return SUCCESS;
}

Status GraphPrepare::FormatAndShapeProcess() {
  Status ret = ResourcePairProcess("add");
  if (ret != SUCCESS) {
    GELOGE(ret, "ResourcePairProcess failed");
    return ret;
  }

  GE_TIMESTAMP_START(InferOriginFormat1);
  ret = compute_graph_->InferOriginFormat();
  GE_TIMESTAMP_END(InferOriginFormat1, "GraphPrepare::InferOriginFormat1");
  GE_DUMP(compute_graph_, "after_first_inferformat");
  if (ret != SUCCESS) {
    GELOGE(ret, "Prepare Graph first inferformat failed");
    return ret;
  }

  GE_TIMESTAMP_START(InferShapeForPreprocess);
  ret = InferShapeForPreprocess();
  GE_TIMESTAMP_END(InferShapeForPreprocess, "GraphPrepare::InferShapeForPreprocess");
  GE_DUMP(compute_graph_, "after_infershape");
  if (ret != SUCCESS) {
    GELOGE(GE_GRAPH_INFERSHAPE_FAILED, "Prepare Graph infershape failed");
    return GE_GRAPH_INFERSHAPE_FAILED;
  }

  GE_TIMESTAMP_START(InferOriginFormat2);
  ret = compute_graph_->InferOriginFormat();
  GE_TIMESTAMP_END(InferOriginFormat2, "GraphPrepare::InferOriginFormat2");
  if (ret != SUCCESS) {
    GELOGE(ret, "Prepare Graph inferformat failed");
    return ret;
  }

  ret = ResourcePairProcess("remove");
  if (ret != SUCCESS) {
    return ret;
  }
  return ret;
}

Status GraphPrepare::ResourcePairProcess(const std::string &action) {
  PassManager control_pass;
  // Graph pass tmp logic for resource infershape
  if (options_.train_graph_flag) {
    try {
      if (action == "add") {
        (void)control_pass.AddPass("ResourcePairProcess::ResourcePairAddControlPass", new ResourcePairAddControlPass);
      } else {
        (void)control_pass.AddPass("ResourcePairProcess::ResourcePairRemoveControlPass",
                                   new ResourcePairRemoveControlPass);
      }
    } catch (std::bad_alloc &e) {
      GELOGE(INTERNAL_ERROR, "Add pass failed, bad memory allocation occur, action:%s.", action.c_str());
      return INTERNAL_ERROR;
    }
  }
  Status ret = control_pass.Run(compute_graph_);
  if (ret != SUCCESS && ret != NOT_CHANGED) {
    GELOGE(ret, "Run ResourcePairControlPass failed, action:%s, ret:%u.", action.c_str(), ret);
    return ret;
  }
  return SUCCESS;
}

Status GraphPrepare::UpdateDataNetOutputByStorageFormat() {
  for (auto &node_ptr : compute_graph_->GetAllNodes()) {
    GE_CHECK_NOTNULL(node_ptr);
    if (node_ptr->GetType() == DATA) {
      uint32_t index = 0;
      auto op_desc = node_ptr->GetOpDesc();
      GE_CHECK_NOTNULL(op_desc);
      const GeTensorDescPtr input = op_desc->MutableInputDesc(index);
      Format storage_format = FORMAT_RESERVED;
      vector<int64_t> dst_shape_dims;
      if (GetStorageFormatAndShape(op_desc, input, storage_format, dst_shape_dims) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Get storage format for input failed");
        return FAILED;
      }

      if (storage_format == FORMAT_RESERVED) {
        continue;
      }

      if (ModifyDataNetOutputFormatAndShape(op_desc, index, storage_format, dst_shape_dims) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Modify format and shape for inputfailed");
        return FAILED;
      }
    }

    if (node_ptr->GetType() == ge::NETOUTPUT) {
      auto op_desc = node_ptr->GetOpDesc();
      GE_CHECK_NOTNULL(op_desc);
      for (uint32_t index = 0; index < op_desc->GetOutputsSize(); index++) {
        const GeTensorDescPtr output = op_desc->MutableOutputDesc(index);
        Format storage_format = FORMAT_RESERVED;
        vector<int64_t> dst_shape_dims;
        if (GetStorageFormatAndShape(op_desc, output, storage_format, dst_shape_dims) != SUCCESS) {
          GELOGE(INTERNAL_ERROR, "Get storage format from output failed");
          return FAILED;
        }
        if (storage_format == FORMAT_RESERVED) {
          continue;
        }
        if (ModifyDataNetOutputFormatAndShape(op_desc, index, storage_format, dst_shape_dims) != SUCCESS) {
          GELOGE(INTERNAL_ERROR, "Modify format and shape for output failed");
          return FAILED;
        }
      }
    }
  }
  return SUCCESS;
}

Status GraphPrepare::SaveOriginalGraphToOmModel() {
  if (options_.save_original_model == "true") {
    ModelHelper model_helper;
    Status ret = model_helper.SaveOriginalGraphToOmModel(ge::GraphUtils::CreateGraphFromComputeGraph(compute_graph_),
                                                         options_.original_model_file);
    if (ret != SUCCESS) {
      // If save original model fail, process continue
      GELOGW("SaveOriginalGraphToOmModel fail");
    }
  }
  return SUCCESS;
}

#define PP_RUN_AND_DUMP(name, func, ...)                                               \
  do {                                                                                 \
    GE_RUN(Prepare, func, __VA_ARGS__);                                                \
    GE_DUMP(compute_graph, "PrepareAfter" name);                                       \
    GELOGI("Prepare %s on graph %s success.", name, compute_graph->GetName().c_str()); \
  } while (0)

#define PP_RUN(name, func, ...)                                                        \
  do {                                                                                 \
    GE_RUN(Prepare, func, __VA_ARGS__);                                                \
    GELOGI("Prepare %s on graph %s success.", name, compute_graph->GetName().c_str()); \
  } while (0)

Status GraphPrepare::PrepareDynShape(ConstGraphPtr graph, const std::vector<GeTensor> &user_input,
                                     ge::ComputeGraphPtr &compute_graph, uint64_t session_id) {
  GE_CHECK_NOTNULL(graph);
  GE_CHECK_NOTNULL(compute_graph);

  GetLocalOmgContext().type = static_cast<domi::FrameworkType>(options_.framework_type);
  const Graph &const_graph = *graph;

  PP_RUN("Init", Init, const_graph, session_id);
  PP_RUN("SetRtContext", SetRtContext, rtContext_t(), RT_CTX_GEN_MODE);
  PP_RUN_AND_DUMP("CheckAndUpdateInput", CheckAndUpdateInput, user_input);
  PP_RUN_AND_DUMP("GraphEquivalentTransformation", GraphEquivalentTransformation);
  PP_RUN_AND_DUMP("ProcessOutput", ProcessNetOutput);
  PP_RUN_AND_DUMP("ProcessMultiBatch", multibatch::ProcessMultiBatch, compute_graph_);
  PP_RUN_AND_DUMP("InsertAipp", TryDoAipp);
  PP_RUN_AND_DUMP("ProcessBeforeInfershape", ProcessBeforeInfershape);
  PP_RUN_AND_DUMP("InferFormatAndShape", FormatAndShapeProcess);
  PP_RUN_AND_DUMP("GetDynamicOutputShape", multibatch::GetDynamicOutputShape, compute_graph_);
  PP_RUN_AND_DUMP("ProcessAippStage2", InsertNewOpUtil::Instance().UpdateDataNodeByAipp, compute_graph_);
  PP_RUN("SaveOriginalGraphToOmModel", SaveOriginalGraphToOmModel);
  PP_RUN_AND_DUMP("PrepareOptimize", PrepareOptimize);

  return SUCCESS;
}

Status GraphPrepare::RecordAIPPInfo(ge::ComputeGraphPtr &compute_graph) {
  PP_RUN("RecordAIPPInfo", InsertNewOpUtil::Instance().RecordAIPPInfoToData, compute_graph_);
  return SUCCESS;
}

Status GraphPrepare::PrepareRunningFormatRefiner() {
  auto compute_graph = compute_graph_;
  PassManager pass_manager;
  GE_CHK_STATUS_RET(pass_manager.AddPass("PrepareRunningFormatRefiner::VariablePrepareOpPass",
                                         new (std::nothrow) VariablePrepareOpPass))
  GE_TIMESTAMP_START(pass_manager);
  auto ret = pass_manager.Run(compute_graph);
  GE_TIMESTAMP_END(pass_manager, "GraphPrepare::PrepareRunningFormatRefiner");
  if (ret != SUCCESS && ret != NOT_CHANGED) {
    GELOGE(ret, "Run passes for running format refiner failed, ret:%u.", ret);
    return ret;
  }
  PP_RUN_AND_DUMP("UpdateInputOutputByUserOptions", UpdateInputOutputByOptions);
  PP_RUN_AND_DUMP("UpdateVariableFormats", UpdateVariableFormats, compute_graph_);
  return SUCCESS;
}

Status GraphPrepare::SwitchOpOptimize(ComputeGraphPtr &compute_graph) {
  if (compute_graph == nullptr) {
    GELOGE(GE_GRAPH_NULL_INPUT, "Input Graph is NULL");
    return GE_GRAPH_NULL_INPUT;
  }
  GEPass ge_passes(compute_graph);
  NamesToPass hccl_group;
  HcclGroupPass hccl_group_pass;
  GELOGD("Add hccl group pass success");
  hccl_group.emplace_back("HcclGroupPass", &hccl_group_pass);
  auto ret = ge_passes.Run(hccl_group);
  if (ret != SUCCESS) {
    GELOGE(ret, "Run HcclGroupPass pass for preprocess failed, ret:%u.", ret);
    return ret;
  }
  ret = compute_graph->TopologicalSorting();
  if (ret != SUCCESS) {
    GELOGE(ret, "Graph topological sort failed, ret:%u.", ret);
    return ret;
  }
  return SUCCESS;
}
#undef PP_RUN_AND_DUMP
#undef PP_RUN

Status GraphPrepare::GenerateInfershapeGraph(ConstGraphPtr graph) {
  if (graph == nullptr) {
    GELOGE(GE_GRAPH_NULL_INPUT, "Input Graph is NULL");
    return GE_GRAPH_NULL_INPUT;
  }
  const Graph &const_graph = *graph;
  Status ret = Init(const_graph, 0);
  if (ret != SUCCESS) {
    GELOGE(ret, "Init graph_prepare fail, ret:%u", ret);
    return ret;
  }
  GE_DUMP(compute_graph_, "after_parser");
  GELOGI("Start infershape for dump json process.");
  ret = compute_graph_->InferOriginFormat();
  GE_DUMP(compute_graph_, "after_inferformat");
  if (ret != SUCCESS) {
    GELOGE(ret, "Prepare Graph inferformat failed");
    return ret;
  }
  InferShapePass infer_shape_pass;
  NamesToPass names_to_passes;
  names_to_passes.emplace_back("InferShapePass", &infer_shape_pass);
  GEPass ge_passes(compute_graph_);
  ret = ge_passes.Run(names_to_passes);
  GE_DUMP(compute_graph_, "after_infershape");
  if (ret != SUCCESS) {
    GELOGE(ret, "Run ge_passes infershape for preprocess failed, ret:%u.", ret);
    return ret;
  }
  ShapeRefiner::ClearContextMap();
  return SUCCESS;
}

Status GraphPrepare::CheckConstOp() {
  for (auto &node_ptr : compute_graph_->GetAllNodes()) {
    GE_CHECK_NOTNULL(node_ptr);
    if (node_ptr->GetType() == CONSTANT) {
      Status ret = VerifyConstOp(node_ptr);
      GE_CHK_BOOL_RET_STATUS(ret == SUCCESS, ret, "Const Op Check failed");
    } else if (node_ptr->GetType() == FRAMEWORKOP) {
      auto op_desc = node_ptr->GetOpDesc();
      if (op_desc == nullptr) {
        GELOGE(PARAM_INVALID, "Get op desc failed");
        return PARAM_INVALID;
      }
      std::string original_type;
      GE_IF_BOOL_EXEC(ge::AttrUtils::GetStr(op_desc, ATTR_NAME_FRAMEWORK_ORIGINAL_TYPE, original_type),
                      GELOGI("Get FrameWorkOp original type [%s]", original_type.c_str()));
      GELOGI("original type is %s", original_type.c_str());
      if (original_type == CONSTANT) {
        Status ret = VerifyConstOp(node_ptr);
        GE_CHK_BOOL_RET_STATUS(ret == SUCCESS, ret, "Const Op Check failed");
      }
    }
  }
  return SUCCESS;
}
Status GraphPrepare::VerifyConstOp(const NodePtr &node) {
  GE_CHECK_NOTNULL(node);
  auto op_desc = node->GetOpDesc();
  GE_CHECK_NOTNULL(op_desc);
  ConstGeTensorPtr ge_tensor_ptr;
  if (!(AttrUtils::GetTensor(op_desc, ATTR_NAME_WEIGHTS, ge_tensor_ptr))) {
    GELOGE(PARAM_INVALID, "Get value from const attr failed");
    return PARAM_INVALID;
  }
  GE_CHECK_NOTNULL(ge_tensor_ptr);
  auto data_size = ge_tensor_ptr->GetData().GetSize();
  auto ge_tensor_desc = ge_tensor_ptr->GetTensorDesc();
  int64_t shape_size = ge_tensor_desc.GetShape().GetShapeSize();
  auto data_type = ge_tensor_desc.GetDataType();
  uint32_t length = 1;
  bool type_ret = TypeUtils::GetDataTypeLength(data_type, length);
  if (!type_ret) {
    ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"},
        {"Input datatype[" + TypeUtils::DataTypeToSerialString(data_type) + "]", "it is not support"});
    GELOGE(PARAM_INVALID, "Input datatype %s is not support.", TypeUtils::DataTypeToSerialString(data_type).c_str());
    return FAILED;
  }
  FMK_INT64_UINT32_MULCHECK(shape_size, length);
  GELOGI("Const real value Size:%zu, op_desc Shape Size:%ld, data_type:%s.", data_size, shape_size * length,
         TypeUtils::DataTypeToSerialString(data_type).c_str());
  if (shape_size == 0) {
    if (ge_tensor_desc.GetShape().GetDims().size() == 0) {
      // shape = [], means it's a sclar tensor.
      GE_CHK_BOOL_EXEC(data_size / length == 1,
          ErrorManager::GetInstance().ATCReportErrMessage("E10043", {"reason"}, {"Const is invalid scalar tensor."});
          return PARAM_INVALID, "Const is invalid scalar tensor.");
    } else {
      // shape = [x, y, 0,...], means it's a vector tensor that value is [].
      GE_CHK_BOOL_EXEC(data_size == 0,
          ErrorManager::GetInstance().ATCReportErrMessage("E10043", {"reason"}, {"Const is invalid vector scalar."});
          return PARAM_INVALID, "Const is invalid vector scalar.");
    }
  } else {
    GE_CHK_BOOL_EXEC(data_size == static_cast<size_t>(shape_size * length) && data_size != 0,
         ErrorManager::GetInstance().ATCReportErrMessage(
             "E10043", {"reason"}, {"Const input data size is not equal with tensor desc shape"});
         return PARAM_INVALID, "Const input data size is not equal with tensor desc shape");
  }
  return SUCCESS;
}

bool GraphPrepare::IsDynamicDims(const NodePtr &input_node) {
  auto data_shape = NodeUtils::GetOutputDesc(*input_node, kDataOutIndex).GetShape();
  const auto &dims = data_shape.GetDims();
  bool all_is_positive = false;
  if (std::all_of(dims.begin(), dims.end(), [](int64_t val) { return val >= 0; })) {
    all_is_positive = true;
  }
  if (!all_is_positive && !options_.input_shape.empty() && !options_.dynamic_dims.empty() &&
      options_.dynamic_node_type != kInvalidDynaimcDimsType) {
    GELOGI("No need to check and update desc info, the dims of %s is %s.", input_node->GetName().c_str(),
           formats::JoinToString(dims).c_str());
    return true;
  }
  return false;
}

Status GraphPrepare::CheckUserInput(const std::vector<GeTensor> &user_input) {
  if (GetLocalOmgContext().is_dynamic_input) {
    return SUCCESS;
  }
  unsigned int node_num = 0;
  unsigned int data_num = 0;
  for (NodePtr &input_node : compute_graph_->GetDirectNode()) {
    GE_CHECK_NOTNULL(input_node);
    OpDescPtr op = input_node->GetOpDesc();
    GE_CHECK_NOTNULL(op);
    node_num++;
    if (op->GetType() == DATA || op->GetType() == AIPPDATA) {
      data_num++;
      GeAttrValue::INT index = 0;
      if (!(AttrUtils::GetInt(op, ATTR_NAME_INDEX, index))) {
        GELOGE(GE_GRAPH_INIT_FAILED, "Get index from attr failed");
        return GE_GRAPH_INIT_FAILED;
      }
      if ((index < 0) || (static_cast<size_t>(index) >= user_input.size())) {
        std::string situation = "data op index[" + std::to_string(index) + "]";
        std::string reason = "it must less than user_input size[" + std::to_string(user_input.size()) + "]";
        ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"}, {situation, reason});
        GELOGE(GE_GRAPH_INIT_FAILED, "user_input size:%zu, data op index:%ld.", user_input.size(), index);
        return GE_GRAPH_INIT_FAILED;
      }
      if (IsDynamicDims(input_node)) {
        continue;
      }
      GeTensorDesc desc(user_input[index].GetTensorDesc());

      for (size_t i = 0; i < desc.GetShape().GetDimNum(); ++i) {
        if (desc.GetShape().GetDim(i) < 0) {
          std::string situation = "data dim[" + std::to_string(i) + "][" +
                  std::to_string(desc.GetShape().GetDim(i)) + "]" ;
          std::string reason = "it need >= 0";
          ErrorManager::GetInstance().ATCReportErrMessage("E19025", {"situation", "reason"}, {situation, reason});
          GELOGE(GE_GRAPH_INIT_FAILED, "data dim %zu is not supported, need >= 0, real:%ld.", i,
                 desc.GetShape().GetDim(i));
          return GE_GRAPH_INIT_FAILED;
        }
      }
    }
  }
  if (node_num <= data_num) {
    GELOGW("Prepare check user input, data_num = %u, node_num = %u", data_num, node_num);
  }
  return SUCCESS;
}

Status GraphPrepare::InferShapeForPreprocess() {
  GELOGI("Start infershape for preprocess.");
  GEPass ge_passes(compute_graph_);
  NamesToPass names_to_passes;
  AssertPass assert_pass;
  if (!options_.train_graph_flag) {
    names_to_passes.emplace_back("AssertPass", &assert_pass);
  }
  InferShapePass infer_shape_pass;
  names_to_passes.emplace_back("InferShapePass", &infer_shape_pass);
  ReplaceWithEmptyConstPass replace_with_empty_const_pass;
  names_to_passes.emplace_back("ReplaceWithEmptyConstPass", &replace_with_empty_const_pass);
  DimensionComputePass dimension_compute_pass;
  names_to_passes.emplace_back("DimensionComputePass", &dimension_compute_pass);
  ConstantFoldingPass constant_folding_pass;
  names_to_passes.emplace_back("ConstantFoldingPass", &constant_folding_pass);

  int32_t dev_count = 0;
  AicpuConstantFoldingPass aicpu_constant_folding_pass;
  const char *aicpu_constant_folding_on = std::getenv("AICPU_CONSTANT_FOLDING_ON");
  rtError_t rt_err = RT_ERROR_NONE;
  if (aicpu_constant_folding_on != nullptr) {
    rt_err = rtGetDeviceCount(&dev_count);
    if (rt_err == RT_ERROR_NONE) {
      Status result = SetRtContext(rtContext_t(), RT_CTX_NORMAL_MODE);
      if (result != SUCCESS) {
        GELOGE(result, "Set rt context failed.");
        return result;
      }
      names_to_passes.emplace_back("AicpuConstantFoldingPass", &aicpu_constant_folding_pass);
    }
  }
  Status ret = ge_passes.Run(names_to_passes);
  if (aicpu_constant_folding_on != nullptr) {
    if (rt_err == RT_ERROR_NONE) {
      Status result = SetRtContext(rtContext_t(), RT_CTX_GEN_MODE);
      if (result != SUCCESS) {
        GELOGE(result, "Set rt context failed.");
        return result;
      }
    }
  }
  ShapeRefiner::ClearContextMap();
  if (ret != SUCCESS) {
    GELOGE(ret, "Run ge_passes infershape for preprocess failed, ret:%u.", ret);
    return ret;
  }
  return SUCCESS;
}
Status GraphPrepare::PrepareOptimize() {
  GELOGI("Start optimize for preprocess.");
  // check rw type
  GraphOptimize graph_optimize;
  bool has_conflict = false;
  graph_optimize.CheckRWConflict(compute_graph_, has_conflict);
  if (has_conflict) {
    GELOGE(GRAPH_PARAM_INVALID, "There has rw conflict.Stop optimize.");
    return FAILED;
  }
  PassManager original_graph_passes;
  // Graph pass
  try {
    (void)original_graph_passes.AddPass("PrepareOptimize::ShapeOperateOpRemovePass", new ShapeOperateOpRemovePass);
    (void)original_graph_passes.AddPass("PrepareOptimize::ReplaceTransShapePass", new ReplaceTransShapePass);
    (void)original_graph_passes.AddPass("PrepareOptimize::MarkAgnosticPass", new MarkAgnosticPass);
  } catch (std::bad_alloc &e) {
    GELOGE(INTERNAL_ERROR, "Add pass failed, bad memory allocation occurs.");
    return INTERNAL_ERROR;
  }

  GE_TIMESTAMP_START(original_graph_passes);
  Status ret = original_graph_passes.Run(compute_graph_);
  GE_TIMESTAMP_END(original_graph_passes, "GraphPrepare::OriginalGraphPasses");
  if (ret != SUCCESS && ret != NOT_CHANGED) {
    GELOGE(ret, "Run graph passes optimize for preprocess failed, ret:%u.", ret);
    return ret;
  }
  // New pass
  GEPass ge_passes(compute_graph_);
  NamesToPass names_to_passes;
  EnterPass enter_pass;
  names_to_passes.emplace_back("EnterPass", &enter_pass);
  CondPass cond_pass;
  names_to_passes.emplace_back("CondPass", &cond_pass);
  PrintOpPass print_pass;
  if (options_.enable_print_op_pass) {
    names_to_passes.emplace_back("PrintOpPass", &print_pass);
  }
  NoUseReshapeRemovePass no_use_reshape_remove_pass;
  names_to_passes.emplace_back("NoUseReshapeRemovePass", &no_use_reshape_remove_pass);

  DropOutPass dropout_pass;
  AssertPass assert_pass;
  UnusedConstPass unused_const_pass;
  StopGradientPass stop_gradient_pass;
  PreventGradientPass prevent_gradient_pass;
  PlaceholderWithDefaultPass placeholder_with_default_pass;
  GuaranteeConstPass guarantee_const_pass;
  VarIsInitializedOpPass var_is_initialized_pass;
  ParallelConcatStartOpPass parallel_concat_start_op_pass;
  IdentityPass identity_pass(false);
  AssignPass assign_pass;
  SnapshotPass snapshot_pass;
  if (!options_.train_graph_flag) {
    names_to_passes.emplace_back("DropOutPass", &dropout_pass);
    names_to_passes.emplace_back("AssertPass", &assert_pass);
  }
  names_to_passes.emplace_back("UnusedConstPass", &unused_const_pass);
  names_to_passes.emplace_back("StopGradientPass", &stop_gradient_pass);
  names_to_passes.emplace_back("PreventGradientPass", &prevent_gradient_pass);
  names_to_passes.emplace_back("PlaceholderWithDefaultPass", &placeholder_with_default_pass);
  names_to_passes.emplace_back("SnapshotPass", &snapshot_pass);
  names_to_passes.emplace_back("GuaranteeConstPass", &guarantee_const_pass);
  names_to_passes.emplace_back("VarIsInitializedOpPass", &var_is_initialized_pass);
  names_to_passes.emplace_back("ParallelConcatStartOpPass", &parallel_concat_start_op_pass);
  names_to_passes.emplace_back("IdentityPass", &identity_pass);
  if (GetContext().GetHostExecFlag()) {
    names_to_passes.emplace_back("AssignPass", &assign_pass);
  }
  GE_TIMESTAMP_START(names_to_passes);
  ret = ge_passes.Run(names_to_passes);
  GE_TIMESTAMP_END(names_to_passes, "GraphPrepare::NamesToPasses");
  if (ret != SUCCESS) {
    GELOGE(ret, "Run ge_passes optimize for preprocess failed, ret:%u.", ret);
    return ret;
  }

  PassManager graph_pass;
  try {
    (void)graph_pass.AddPass("PrepareOptimize::PrunePass", new PrunePass);
  } catch (std::bad_alloc &e) {
    GELOGE(INTERNAL_ERROR, "Add pass failed, bad memory allocation occurs.");
    return INTERNAL_ERROR;
  }

  GE_TIMESTAMP_START(graph_passes);
  ret = graph_pass.Run(compute_graph_);
  GE_TIMESTAMP_END(graph_passes, "GraphPrepare::GraphPasses");
  if (ret != SUCCESS && ret != NOT_CHANGED) {
    GELOGE(ret, "Run graph passes optimize for preprocess failed, ret:%u.", ret);
    return ret;
  }
  // The constant for train is CONSTANTOP, and is CONSTANT for inference. They will be unified in future.
  TypeConversionOfConstant();

  ret = compute_graph_->TopologicalSorting();
  if (ret != SUCCESS) {
    GELOGE(ret, "Graph topological sort failed, ret:%u.", ret);
    return ret;
  }

  GELOGI("End optimize for preprocess.");

  return SUCCESS;
}

void GraphPrepare::TypeConversionOfConstant() {
  bool is_acl_compile = false;
  for (ge::NodePtr &n : compute_graph_->GetAllNodes()) {
    // This can ensure that n is not a null pointer
    // No Conversion when called by aclOpCompile
    (void)AttrUtils::GetBool(n->GetOpDesc(), ATTR_DYNAMIC_SHAPE_SINGLE_AICPU, is_acl_compile);
    if (is_acl_compile) {
      return;
    }
  }

  if (options_.train_graph_flag) {
    GELOGD("trans CONSTANT to CONSTANTOP in train.");
    for (ge::NodePtr &n : compute_graph_->GetAllNodes()) {
      // This can ensure that n is not a null pointer
      if (n->GetOpDesc()->GetType() == CONSTANT) {
        n->GetOpDesc()->SetType(CONSTANTOP);
      }
    }
  } else {
    GELOGD("trans CONSTANTOP to CONSTANT in inferrence.");
    for (ge::NodePtr &n : compute_graph_->GetAllNodes()) {
      // This can ensure that n is not a null pointer
      if (n->GetOpDesc()->GetType() == CONSTANTOP) {
        n->GetOpDesc()->SetType(CONSTANT);
      }
    }
  }
}

Status GraphPrepare::GraphEquivalentTransformation() {
  NamesToPass names_to_pass;
  ForPass for_pass;
  names_to_pass.emplace_back("ForToWhilePass", &for_pass);
  return GEPass(compute_graph_).Run(names_to_pass);
}

Status GraphPrepare::ProcessBeforeInfershape() {
  NamesToPass names_to_passes;
  CondRemovePass condition_remove_pass;
  names_to_passes.emplace_back("CondRemovePass", &condition_remove_pass);
  GE_TIMESTAMP_START(ProcessCondRemove);
  auto ret = GEPass(compute_graph_).Run(names_to_passes);
  GE_TIMESTAMP_END(ProcessCondRemove, "GraphManager::ProcessCondRemove");
  if (ret != SUCCESS) {
    GELOGE(ret, "Run ge_passes optimize for OptimizeAfterMergeSubGraph failed, ret:%d.", ret);
    return ret;
  }
  return SUCCESS;
}

Status GraphPrepare::ProcessNetOutput() {
  PassManager graph_passes_before_infershape;
  try {
    if (options_.train_graph_flag) {
      graph_passes_before_infershape.AddPass("ProcessNetOutput::SavePass", new (std::nothrow) SavePass);
    }
    graph_passes_before_infershape.AddPass("ProcessNetOutput::NetOutputPass", new (std::nothrow) NetOutputPass);
    graph_passes_before_infershape.AddPass("ProcessNetOutput::DataPass",
                                           new (std::nothrow) DataPass);  // Add NetOutput first.
  } catch (std::bad_alloc) {
    GELOGE(INTERNAL_ERROR, "Add pass failed, bad memory allocation occurs.");
    return INTERNAL_ERROR;
  }

  auto ret = graph_passes_before_infershape.Run(compute_graph_);
  if ((ret != SUCCESS) && (ret != NOT_CHANGED)) {
    GELOGE(ret, "Run graph_passes_before_infershape failed, ret:%d.", ret);
    return ret;
  }
  return SUCCESS;
}

Status GraphPrepare::CheckAndUpdateInput(const std::vector<GeTensor> &user_input) {
  compute_graph_->SetInputSize(user_input.size());
  if (user_input.empty()) {
    return SUCCESS;
  }

  auto ret = CheckUserInput(user_input);
  if (ret != SUCCESS) {
    GELOGE(ret, "Check user input failed.");
    return ret;
  }

  ret = UpdateInput(user_input);
  if (ret != SUCCESS) {
    GELOGE(ret, "UpdateInput fail, ret:%u", ret);
    return ret;
  }
  if (user_input.size() != 0) {
    ret = CheckConstOp();
    if (ret != SUCCESS) {
      GELOGE(ret, "CheckConstOp fail, ret:%u", ret);
      return ret;
    }
  } else {
    ret = compute_graph_->TopologicalSorting();
    if (ret != SUCCESS) {
      GELOGE(ret, "graph prepare error: compute_graph_->Topological Sorting");
      return FAILED;
    }
  }
  return SUCCESS;
}
Status GraphPrepare::UpdateInputOutputByOptions() {
  auto ret = UpdateDataNetOutputByStorageFormat();
  if (ret != SUCCESS) {
    GELOGE(ret, "Update format acoording to storage format failed.");
    return ret;
  }

  if (options_.train_graph_flag) {
    GELOGI("This is train mode, no need to do this schedule.");
    return SUCCESS;
  }
  for (auto &node_ptr : compute_graph_->GetDirectNode()) {
    GE_CHECK_NOTNULL(node_ptr);
    if (CheckIfNeedSetNdFormat(node_ptr) != SUCCESS) {
      GELOGE(INTERNAL_ERROR, "Set node [%s] format ND failed", node_ptr->GetName().c_str());
      return FAILED;
    }

    if (node_ptr->GetType() == DATA) {
      if (ProcessDataNodeDynShape(node_ptr) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Process data node failed");
        return FAILED;
      }
    }

    if (node_ptr->GetType() == ge::NETOUTPUT) {
      if (ProcessNetoutputNodeDynShape(node_ptr) != SUCCESS) {
        GELOGE(INTERNAL_ERROR, "Process netoutput node failed");
        return FAILED;
      }
    }
  }
  return SUCCESS;
}

bool GraphPrepare::IsTansDataOpData(const ge::NodePtr &var_node) {
  for (auto &out_anchor : var_node->GetAllOutDataAnchors()) {
    GE_RT_FALSE_CHECK_NOTNULL(out_anchor);
    for (auto &in_anchor : out_anchor->GetPeerInDataAnchors()) {
      GE_RT_FALSE_CHECK_NOTNULL(in_anchor);
      ge::NodePtr dst_node = in_anchor->GetOwnerNode();
      GE_RT_FALSE_CHECK_NOTNULL(dst_node);
      if (dst_node->GetType() == TRANSDATA) {
        return true;
      }
    }
  }
  return false;
}
}  // namespace ge